Overview
The G2 Chrysler 9.25 inch rear ring and pinion, part number 2-2028-456, is a 4.56 ratio gear set for a Chrysler 9.25 inch rear axle. It is made for use on all ratio carriers.
The gears are cut from computer heat treated 8620 steel, double shot peened and double lapped. The set is built for oversized tires and high-output engines and is manufactured to O.E. specifications.
Key features
- 4.56 gear ratio
- Computer heat treated 8620 steel
- Double shot peened and double lapped
- Built to O.E. specifications
- 10 year warranty
Setting up a 4.56 ratio
A 4.56 ratio changes how the engine works through the gears, which is why many drivers choose it for larger tires. The shift is noticeable in acceleration and in highway cruising rpm, so the change suits drivers who want more pull from the drivetrain. Think about how the truck is used before settling on the ratio.
The gear set needs a matching carrier and a careful setup. Check the carrier and the axle housing, then have the pinion depth and backlash set by someone experienced with gear work. After installation, a break-in period helps the teeth seat, so keep the first drives gentle and avoid heavy loads for a while.
- Confirm the carrier ratio before buying
- Plan on new bearings and shims during the swap
- Check the speedometer calibration after the change
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2028-456 |
| UPC | 631410093797 |
| Location | Rear |
| Axle type | Chrysler 9.25 inch |
| Axle manufacturer | Chrysler |
| Gear ratio | 4.56 |
| Carrier compatibility | All ratio carriers |
| Material | Computer heat treated 8620 steel |
| Finishing | Double shot peened, double lapped |
| Warranty | 10 years |
Vehicle fitment
This set fits the Chrysler 9.25 inch rear axle, and fitment follows axle size rather than model. Confirm the axle housing is a 9.25 inch Chrysler before ordering.
Installation notes
A gear shop should set the pinion depth and backlash, and the set needs a break-in period afterward.
What’s included
The gear set only. Bearings, shims and carrier parts are not included.













