Overview
The G2 Axle and Gear 2-2046-488L is a 4.88 ratio long ring and pinion for the Ford 10.25 inch rear axle. It is made for the rear location and works with all ratio carriers. The long version is built for this 10.25 inch housing.
The gears are built for oversized tires and high performance engines. They use computer heat treated 8620 steel with double shot peened and double lapped surfaces. With the 35-2046 Master Kit, the set fits the Ford 10.5 inch housing.
Key features
- Long 4.88 ratio rear ring and pinion
- Ford 10.25 inch rear axle
- Works with all ratio carriers
- Fits Ford 10.5 inch with the 35-2046 Master Kit
- Computer heat treated 8620 steel
- Double shot peened surfaces
- Double lapped gear set
- Manufactured to O.E. specifications
- 10 year warranty from G2
Long gears and the 10.5 housing
Long and standard ring and pinion sets are not always interchangeable. A long pinion is positioned differently in the housing, so mounting depth and carrier spacing have to match the case. Before ordering, confirm which housing is under the vehicle and whether an adapter kit such as the 35-2046 Master Kit is needed. Placing a long gear in a standard case can leave the mesh out of position.
Other parts often get renewed with the gears. Pinion bearings, the pinion seal and the carrier bearings all affect mesh and preload, so replacing them keeps the new set from settling into old wear. Inspect the existing ring gear for chipped teeth and check the axle shafts for play. A clean, measured setup makes the first break-in period more predictable.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-488L |
| UPC | 631410094497 |
| Gear ratio | 4.88 |
| Axle location | Rear |
| Axle type | Ford 10.25 inch and Ford 10.5 inch |
| Popular axle manufacturer | Ford |
| Carrier requirement | All ratio carriers |
| Version | Long |
| Material | Computer heat treated 8620 steel |
Vehicle fitment
It fits the Ford 10.25 inch rear axle, and the Ford 10.5 inch when used with the 35-2046 Master Kit. Confirm the year, model and trim of your vehicle before ordering.
Only the Ford 10.25 inch and Ford 10.5 inch is named for this 4.88 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The long 10.25 inch gears need the 35-2046 Master Kit for the 10.5 inch housing, and a driveline shop should set pinion depth, backlash and bearing preload before break-in.
What’s included
A matched long ring and pinion for the Ford 10.25 inch rear axle.
Not included: the 35-2046 Master Kit.













