Overview
The G2 Axle and Gear GM 14B 11.5-inch AAM Master Ring and Pinion Install Kit, part number 35-2024A, is a master install kit titled for the AAM 11.5-inch GM 14B axle. Its UPC is 631410126556.
The title is the main description available, so the axle designation is the first thing to check against the axle you are working on.
Measuring an AAM housing
An AAM-designated housing differs from others in its carrier layout and bolt pattern, so the designation matters as much as the size. Before buying, measure the ring gear diameter, pinion flange and cover bolt spacing, then compare each figure with the housing on the vehicle. Matching only the axle name is not enough to confirm fit.
Setup is where most master kit jobs go wrong. Pinion depth, preload and backlash must be set together, and a gear technician usually handles them with a dial indicator and preload gauge. Plan for fresh bearings and seals, since old ones rarely last through a full gear change.
- Measure ring gear diameter and pinion flange
- Compare cover bolt spacing with the housing
- Plan for fresh bearings and seals
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2024A |
| UPC | 631410126556 |
| Kit type | Master |
| Axle | GM 14B, AAM, 11.5-inch |
Vehicle fitment
It is for the AAM 11.5-inch GM 14B axle. Check year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a master kit, pinion depth and bearing preload should be set by a qualified gear technician. Improper setup can damage a gear set quickly.
What’s included
Compare the included parts with your installation before starting.







