Overview
The G2 Ford 8.8 Inch Front Reverse 4.56 Ratio Ring and Pinion, part 2-2088-456, is a front reverse gear set at 4.56 for the Ford 8.8 inch axle.
It is a front reverse gear set built for the Ford 8.8 inch front axle. The gears are computer heat treated 8620 steel, shot peened and double lapped, and the set works with all ratio carriers.
Key features
- 4.56 gear ratio
- Front axle position
- Front reverse design
- Works with all ratio carriers
Before the carrier is built
A reverse gear set is built with a different gear arrangement than a standard set, so the setup process is different from a typical front gear swap. The pinion depth, preload, and backlash all need to be set with the reverse layout in mind. A driveline shop familiar with front reverse gears is the right choice for this job.
Front axle gears work hard when the truck is steered and driven under power, so the carrier bearings and axle seals deserve attention during the build. Replacing worn seals and checking the front axle housing for wear at the same time saves a second teardown later.
- Confirm the gear type before ordering
- Match the pinion depth to the reverse design
- Replace front axle seals during the swap
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2088-456 |
| UPC | 631410094756 |
| Make | Ford |
| Axle size | 8.8 inch |
| Axle location | Front |
| Gear ratio | 4.56 |
| Gear type | Reverse |
Vehicle fitment
Universal fit is listed, but no model or years are named for this Ford 8.8 inch front axle. Confirm the application before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Reverse sets change the gear setup, so confirm the pinion depth and preload specification for a front reverse before the carrier is built.
What’s included
One ring and pinion set.
















