Overview
The shaft is a driver side front inner shaft with 30 splines and a 36.13 inch overall length. It is made for 1973–1978 GM Dana 44 applications.
G2 forges the shaft from high-grade alloy steel and heat treats it to exceed OEM specifications. The shaft is machined for full circle clips and accepts a 5-760X U-joint, and its long overall length makes measuring the old shaft a necessary step.
Key features
- Driver side front inner shaft with 30 splines
- 36.13 inch overall length
- Accepts a 5-760X U-joint
- Machined to take full circle clips
- Forged high-grade alloy steel, heat treated to exceed OEM specifications
Measuring before you order
A long inner shaft is easy to misjudge by eye, so measuring the old part is the most reliable check. Measure from the spline end to the U-joint end, and count the splines on the old shaft. Compare both figures with the new shaft before installing it, since fitment depends on the overall length as well as the spline count.
Plan for the parts that are not included with the shaft. A U-joint, clips, bearings and seals are needed to complete the job, so gather them before starting. Inspect the axle housing and bearing bore while the shaft is out, and replace any seal that shows leaks or hardening.
- Measure the old shaft from spline end to U-joint end
- Count splines on the old and new shafts
- Gather U-joint, clips, bearings and seals before starting
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2033-013 |
| UPC | 631410097245 |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft location | Driver side, inner |
| Spline count | 30 splines |
| Overall length | 36.13 inches |
| U-joint | 5-760X |
| Clip style | Machined for full circle clips |
| Material | Forged high-grade alloy steel, heat treated |
Vehicle fitment
The shaft is made for 1973–1978 GM Dana 44 applications. Check the axle type and confirm your GM year and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 36.13 inches, this shaft is long for an inner. Measure the shaft you are replacing from the spline end to the U-joint end before you order.
What’s included
One inner axle shaft.
Not included: U-joint, clips, bearings and seals.






