Select your vehicle
-13%

G2 C Gusset Kit – 68-2051-2

G2 Axle and Gear

Shop Jeep Wrangler JK Gussets Tabs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 68-2051-2 inner C gusset kit for JK Dana 30 and Dana 44 front axles
  • Laser cut 1/4 inch thick steel, unpainted
  • Includes Heavy Duty Lower Control Arm Skids
  • Welding required; fits 2007-2018 Jeep Wrangler JK

Description

Overview

The 68-2051-2 is an inner C gusset kit for the front Dana 30 and Dana 44 axles on the Jeep Wrangler JK. The gussets are laser cut from 1/4 inch thick steel for a precise fit and arrive unpainted. The kit fits 2007-2018 Jeep Wrangler JK models.

Key features

  • Inner C gussets for Dana 30 and Dana 44 front axles
  • Laser cut 1/4 inch thick steel
  • Kit includes Heavy Duty Lower Control Arm Skids
  • It fits 2-door and 4-door Wrangler JK models.
  • Unpainted; welding required

Welding and corrosion protection

Gussets like these carry load between the axle housing and the frame area, so the weld quality matters as much as the steel. Clean the mating surfaces to bare metal before fitting, and tack the gussets in place before full welding so the alignment can be checked. Heat from welding can warp thin housing material, so work in short passes and let the area cool between them.

The steel arrives unpainted, so the cut edges and welds will rust quickly without a coating. Paint or a rust inhibitor applied after welding helps protect the joints from road salt and moisture. When inspecting on the trail or during servicing, look for cracks at the weld toes and for any movement at the skid mounts.

Specifications

Brand G2 Axle and Gear
Part number 68-2051-2
UPC 631410121216
Axle location Front
Axle type Dana 30/44
Material Heavy-duty steel, 1/4 inch thick, laser cut
Finish Unpainted
Fitment Direct fit, without steering ram mount
Included Heavy Duty Lower Control Arm Skids

Vehicle fitment

This kit fits the Jeep Wrangler JK (2007-2018) with front Dana 30 or Dana 44 axles. It is a direct fit without a steering ram mount.

Wrangler TJ, LJ and JL models are other generations and are not covered by this JK listing.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Welding is required, and professional welding skills are recommended. Test-fit the gussets and skids before welding. Welding on an axle housing should be done by someone trained for it, since a poor weld can fail on the trail.

What’s included

The G2 inner C gusset kit, including Heavy Duty Lower Control Arm Skids.

Not included: welding equipment and consumables, since welding is required.

SKU: G/268-2051-2 Category:

Specification

Shipping weight 13.00 lbs
Package dimensions 10.00 × 6.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the G2 68-2051-2 fit a 2007-2018 Jeep Wrangler JK?

Yes. It fits the JK Dana 30 and Dana 44 front axles, and the JK chassis code covers the 2007-2018 Wrangler. Confirm your year, model and trim before ordering.

Does this gusset kit need welding?

Yes. Welding is required, and professional welding skills are recommended. The gussets are laser cut from 1/4 inch steel and set for a precise fit before they are welded in place.

Does the kit include the lower control arm skids?

Yes. The kit includes Heavy Duty Lower Control Arm Skids. It is a direct fit without a steering ram mount, so it suits axles set up without that mount.

Are the gussets painted?

No. The short description says unpainted, so the steel will need paint or another coating after cutting and welding if you want protection against rust.

Can the gussets be bolted on instead of welded?

No. The kit is set up for welded installation, so bolt-on mounting is not the intended method. Welding requires skill and proper equipment, and a poor weld can fail on the trail, so have a trained welder do the work.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Gussets Tabs on Amazon