Overview
The G2 Axle and Gear 4-XJ4-456M is a 4.56 ring and pinion gear set with front and rear minor installation kits for the 1987–1990 Jeep Cherokee XJ. The kit pairs a 4.56 front gear set for the Dana 30 reverse front axle with a 4.56 rear gear set for the Dana 44 rear axle, so both axles of the Jeep are regeared in one kit.
For the 4-XJ4-456M, G2 describes its complete ring and pinion kits as including everything needed for a gear swap: front and rear gear sets plus the minor installation kits for both axles. The 4-XJ4-456M gives Cherokee XJ owners a 4.56 option for changing axle gearing, and G2 says its gears are engineered for oversized tires and high performance engines.
Key features
- Complete front and rear set: 4.56 ring and pinion gear sets for both axles plus matched minor installation kits
- Built for the Dana 30 reverse front axle and the Dana 44 rear axle
- Computer heat treated 8620 steel gears
- Manufactured to O.E. specs
- Double shot peened and double lapped gear sets
- Limited lifetime warranty listed by G2
- Carrier requirement: front 3.73 and up, rear 3.91 and up
Choosing the right carriers
Carrier design decides which gear sets fit an axle, so the carrier type should be identified before ordering. A reverse Dana 30 uses a differential arranged differently from the standard Dana 30, which changes how the gears mount and which ring gear matches it. Check the axle casting and the carrier markings against the kit before opening the housing.
A numerically higher ratio is a common choice when larger tires are fitted, because the engine works harder at the same road speed. Consider how the vehicle is used, since a locking or limited-slip differential may need a different setup and additional parts when the gears are changed.
- Identify the carrier type before ordering
- Check axle casting and carrier markings
- Consider the differential type when regearing
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 4-XJ4-456M |
| UPC | 631410141429 |
| Product type | Ring and pinion gear sets with front and rear minor installation kits |
| Gear ratio | 4.56 |
| Vehicle named in listing | 1987–1990 Jeep Cherokee XJ |
| Front axle | Dana 30 reverse (3.73 and up carrier) |
| Rear axle | Dana 44 (3.91 and up carrier) |
| Axle location | Front and rear |
| Kit type | Minor kit |
| Gear material | Computer heat treated 8620 steel |
| Finishing | Double shot peened, double lapped |
| Manufacturing | Manufactured to O.E. specs |
| Warranty | Limited lifetime warranty |
Vehicle fitment
The 4-XJ4-456M is for the 1987–1990 Jeep Cherokee XJ with a Dana 30 reverse front axle (3.73 and up carrier) and a Dana 44 rear axle (3.91 and up carrier). Confirm your vehicle’s year, model and trim before ordering.
The 4-XJ4-456M listing does not cover Cherokee XJ model years outside 1987–1990, other Cherokee generations such as the SJ and KL, and the Grand Cherokee. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting the 4-XJ4-456M changes the gear ratio on both axles of a Cherokee XJ, which is work for an experienced gear installer. The two minor installation kits in the 4-XJ4-456M are the parts used for setting the new gears, and the same 4.56 ratio goes in both axles so the drivetrain stays matched. The 4-XJ4-456M is a minor kit, and bearing sets are not among its listed contents. Plan a careful break-in for the new 4-XJ4-456M gears after installation.
What’s included
- Front ring and pinion gear set, 4.56
- Rear ring and pinion gear set, 4.56
- Front minor installation kit
- Rear minor installation kit





