Select your vehicle

Dana 44 Axle Shafts covers OEM-style and high-strength chromoly replacement shafts for the Dana 44, including front outer shafts, inner shafts and rear axle kits for Jeep JK and Rubicon applications. Brands include G2 Axle and Gear, Alloy USA, Crown Automotive, Dana Spicer and RCV Axles. See each product page for specifications, then compare the products below.

Showing 1–12 of 84 resultsSorted by popularity

About Dana 44 axle shafts

The Dana 44 is a widely used axle found in many Jeeps, trucks and SUVs, in both front and rear versions. The axle shaft transfers torque from the differential to the wheel hub, so it takes the stress of every hard launch, rock crawl and tire-spinning moment. Shafts can bend, twist or snap when stress exceeds their strength.

This category includes complete replacements as well as inner and outer shafts listed separately, so confirm which piece you need.

OEM replacement versus chromoly

Factory-style shafts suit stock vehicles and moderate use. Chromoly shafts are made from a stronger alloy steel and are popular when larger tires, lockers or more power add strain. Stronger shafts shift the weakest point elsewhere in the driveline, so consider the whole system, including U-joints, differential and axle housing.

Some listings are marked as chromoly kits with gold or special coatings. These are product descriptions and not guarantees of performance, so compare the specifications.

Specifications to match

  • Spline count, such as the 30 or 35 spline shafts that appear in Jeep JK listings, which must match your differential or locker.
  • Shaft length and which side it fits, because driver and passenger sides often differ.
  • Front or rear position, and whether the shaft is inner, outer or a complete assembly.
  • Wheel bearing, seal and hub compatibility, including ABS tone ring requirements on later models.
  • Differential carrier type, as some replacement kits are designed for particular lockers.

Installation notes

Replacing a shaft involves removing the wheel, brake components and hub, so use jack stands and follow the factory service procedure. Inspect bearings, seals and U-joints while the axle is open, and replace worn items. Clean mating surfaces, use the specified torque values and refill or top off differential fluid as needed.

Axle work affects braking and steering components, so a professional installation is a sensible choice if you lack experience. Always confirm fitment for your exact year, make and model against the manufacturer's specifications.

Further checks and care

Related parts worth checking

When shafts are replaced, it makes sense to inspect the parts that share their load. Look at the axle seals for leaks, the hub bearings for roughness and the U-joints for play. A worn locker or differential can also cause shafts to fail, and an axle housing that has been bent can create repeated breakage. Replacing wear items at the same time can prevent a second teardown a few months later.

Confirming that you have a Dana 44

Several axles carry similar housings, so verify the model before ordering shafts. Check the tag on the differential cover bolts or the housing, count the cover bolts, and measure the ring gear diameter, which is about 8.5 inches on a Dana 44. Note whether the axle is a front or rear unit, the vehicle platform and whether it came with a disconnect or a locker. These details determine shaft length, spline count and hub pattern.

Materials, heat treatment and maintenance

Shaft strength comes from alloy composition, heat treatment and the quality of the splines and radius at the shoulders. Chromoly shafts are hardened to resist twisting, while very hard shafts can be more brittle under sudden shock. Check splines for wear, keep the seals in good condition and replace gear oil after water crossings. Listen for clicking, vibration or play at the wheel, which can reveal a failing shaft before it breaks.

Related guides

Popular Dana 44 Axle Shafts brands

Dana 44 Axle Shafts FAQ

How do I know if I need a 30 or 35 spline shaft?

Count the splines on the existing shaft or check the differential and carrier specifications. The shaft spline count must match the side gear, and a locker or aftermarket carrier may require a particular count.

Are chromoly axle shafts unbreakable?

No. Chromoly is stronger than standard steel, but any shaft can fail from shock loading, poor driving technique or worn components. Stronger shafts also move stress to other drivetrain parts.

Should I replace axle shafts in pairs?

Often it is wise, especially if one shaft failed from age or heavy use, but it is not required. Inspect the opposite side, and consider replacing both for balanced strength when upgrading to larger tires.