Overview
The G2 Axle and Gear 2-2050-456R is a front reverse ring and pinion gear set with a 4.56 ratio for the Dana 30 front axle of the 2007–2018 Jeep Wrangler JK.
The gears are made from computer heat treated 8620 steel, double shot peened and double lapped, and are manufactured to O.E. specifications. The set is for use with a 3.73 and up carrier.
Key features
- 4.56 gear ratio
- Computer heat treated 8620 steel
- Double shot peened
- Double lapped
- For use with a 3.73 and up carrier
Gear setup and break-in
Ring and pinion sets only work well when pinion depth, preload and backlash are set correctly. Mesh is checked with gear marking compound and adjusted with shims until the contact pattern is even. This setup takes specialized tools and patience, so most owners leave it to a shop with gear experience.
After installation, the gears need a break-in period in which loads are kept moderate and the differential is checked for heat, noise and leaks. Early wear is often traced to a rushed break-in or a setup that was never checked. Fresh gear oil and a clean housing help the new set run quietly over its life, and regular fluid changes keep the surfaces protected.
- Confirm the carrier ratio before buying
- Recheck fluid level after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2050-456R |
| UPC | 631410111118 |
| Axle location | Front |
| Axle | Dana 30 |
| Gear ratio | 4.56 |
| Carrier | 3.73 and up |
| Material | 8620 steel, computer heat treated |
| Manufacture | To O.E. specifications |
| Warranty | 10 years, per the manufacturer |
Vehicle fitment
This gear set is for the front Dana 30 axle of the 2007–2018 Jeep Wrangler JK.
Other vehicles with a Dana 30 front axle are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear sets need professional setup for mesh and backlash, followed by a break-in period. Have a shop set up and break in the gears rather than installing them yourself.
What’s included
One front ring and pinion gear set. Check the package contents against your installation before starting, including pinion and carrier bearings.

















