Overview
The G2 Axle and Gear G2 CORE 44 rear housing, part number 67-2052YJR, is a bare 44 axle housing with a Brute Diff Cover. It is intended for the Jeep Cherokee (XJ) and Wrangler (YJ) and is built around the XJ/YJ chassis codes. Confirm fit for your vehicle’s year, model and trim before ordering.
Rear axle housing setup
A rear axle housing carries the axle shafts, the differential carrier and the brake mounting points, so the housing is the foundation for the rest of the axle. Before fitting a bare housing, check the mounting pads, the bolt pattern and the axle tube ends against the vehicle and the parts you plan to reuse. Mismatched tube ends or flanges are a common reason a swap goes wrong.
Plan on sourcing the axle shafts, carrier, brakes and seals separately, then measure and test-fit the assembly before final assembly. Clean the housing thoroughly and inspect the axle tube for cracks or dents, especially near the welds. Fill the housing with the gear oil your differential uses once the carrier is installed and set, then check for leaks after the first drives.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 67-2052YJR |
| UPC | 631410131819 |
| Axle size | 44 |
| Housing type | Bare housing |
| Cover | Brute Diff Cover |
Vehicle fitment
Fits the XJ/YJ chassis codes: Cherokee (XJ) 1984-2001 and Wrangler (YJ) 1987-1995.
This does not cover the Wrangler TJ or the Grand Cherokee ZJ and WJ, which are other generations. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The housing is bare and comes with a Brute Diff Cover.
Not included: Axle shafts, gears, brakes and the differential carrier are not part of this housing.









