Overview
Part number 92-2052-8 identifies this Double Cardan CV rear drive shaft from G2 Axle and Gear, made for four-door Jeep Wrangler JK models with an automatic transmission.
G2 Axle and Gear describes heavy duty replacement construction with D.O.M. tubing and solid body U-joints. Balancing is dynamic and intended to eliminate vibration, and the stated fit is stock to 6 inch lift with tires up to 37 inches.
Key features
- Heavy duty D.O.M. tubing
- Solid body U-joints
- Dynamically balanced to eliminate vibration
- Double Cardan CV driveshaft type
- Rated for stock to 6 inch lift
- Rated for tires up to 37 inches
Driveline angles after a lift
A rear driveshaft works with the pinion angle and the transfer case output angle, and a lift changes both. Once suspension height moves, joint angles can grow beyond what a CV-style shaft is designed to accept, which causes vibration at speed. Measure the angles with an inclinometer before and after any height change.
Tire size also matters, since larger tires change the gearing and add load on the driveline. Upgraded control arms or a pinion adjustment often accompany a lift, and those parts affect driveline geometry. Inspect the U-joint caps and the slip yoke for wear during any suspension work.
- Check pinion angle with an inclinometer
- Inspect U-joint caps for play
- Look for vibration at highway speed
- Re-torque yoke bolts after the first drive
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 92-2052-8 |
| UPC | 631410130621 |
| Position | Rear |
| Driveshaft type | Double Cardan CV |
| U-joint | 1350 |
| Tubing | Heavy duty D.O.M. |
| Maximum lift height | 6 inches |
| Tire size | Up to 37 inches |
| Body style | 4-door |
| Transmission | Automatic |
Vehicle fitment
This rear shaft is for the Jeep Wrangler JK (2007-2018), four-door models with an automatic transmission.
Two-door JK vehicles need one of the two-door rear shafts in this line, 92-2052-3 or 92-2052-7. Other Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rear CV shaft does not need a slip yoke eliminator. Check driveline angles after any lift, since the rating ends at 6 inches.
What’s included
One rear Double Cardan CV drive shaft assembly.


















