Overview
The G2 Axle and Gear 4-XJ4-410 is a front and rear ring and pinion kit for the 1984–2001 Jeep Cherokee (XJ). It has 4.10 gears on a Dana 30 reverse front and 4.09 gears on a Dana 44 rear, with matched master installation kits for the swap.
The rear axle is a Dana 44 rather than the smaller Dana 35 used in other G2 XJ kits. The rear gears are for a 3.91 and up carrier. The gears are computer heat treated 8620 steel and come with a limited lifetime warranty.
Key features
- 4.10 front and 4.09 rear gears
- Dana 30 reverse front, Dana 44 rear
- Matched master installation kits
- Fits 1984 to 2001 XJ Cherokee
- 3.91 and up rear carrier
Setup and break-in
Regearing an axle is a precision job. Pinion depth, bearing preload and ring gear backlash all interact, and each one affects noise, wear and tooth contact. Setting them with the master installation kits gives a repeatable baseline, but the work still needs a dial indicator, a clean housing and patient measurement.
After assembly, fill the axles with the correct gear oil and break in the new gears gently. Avoid heavy throttle and hard loading for the first stretch of driving, then re-check the bolts, the pinion nut torque and the fill level. Many owners also check for leaks at the seals after the first few trail runs.
- Verify pinion depth before final assembly
- Set preload to the bearing specification
- Confirm backlash and tooth contact pattern
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 4-XJ4-410 |
| UPC | 700007521801 |
| Product type | Front and rear ring and pinion sets with master installation kits |
| Gear ratio | 4.10 |
| Front axle gears | Dana 30 reverse 4.10 |
| Front carrier | 3.73 and up |
| Rear axle gears | Dana 44 4.09 |
| Rear carrier | 3.91 and up |
| Installation kits | Front and rear matched master installation kits |
| Material | Computer heat treated 8620 steel |
| Manufacturing | Manufactured to O.E. specs, double shot peened, double lapped |
| Warranty | Limited lifetime warranty |
Vehicle fitment
The 4-XJ4-410 fits the 1984 to 2001 XJ Cherokee with a Dana 30 reverse front axle and a Dana 44 rear axle.
The 4-XJ4-410 does not cover an XJ with a Dana 35 or Chrysler 8.25 rear axle, or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4-XJ4-410 asks for pinion depth, preload and backlash to be set on both axles, supported by the master installation kits. The front wants a 3.73 and up carrier and the Dana 44 rear a 3.91 and up carrier. Use an experienced installer.
What’s included
- Front ring and pinion gear set
- Rear ring and pinion gear set
- Front matched master installation kit
- Rear matched master installation kit
Not included: carriers and parts outside the master installation kits.









