Select your vehicle
-13%

G2 Double Cardan CV Style Front Drive Shaft – 92-2050-3

G2 Axle and Gear

Shop Jeep Wrangler JK Drive Shafts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front Double Cardan CV drive shaft for two- and four-door Jeep Wrangler JK models
  • Part number 92-2050-3, 1350 U-joint
  • Rated for stock to 6 inch lift and tires up to 37 inches
  • Heavy duty D.O.M. tubing with solid body U-joints

Description

Overview

The G2 Axle and Gear Double Cardan CV Style Front Drive Shaft, part number 92-2050-3, is a heavy duty replacement front driveshaft for two- and four-door Jeep Wrangler JK models with an automatic transmission.

It uses D.O.M. tubing, solid body U-joints and dynamic balancing. It is rated for stock to 6 inch lift and tires up to 37 inches, and the fitment table says no slip yoke eliminator is required.

Key features

  • Heavy duty D.O.M. tubing for strength
  • Solid body U-joints for durability
  • Dynamically balanced to eliminate vibration
  • Double Cardan CV driveshaft type
  • Rated for stock to 6 inch lift
  • Rated for tires up to 37 inches

Front axle and steering clearance

The front shaft connects the transfer case front output to the front differential, and it must cope with the steering angle as well as the suspension. Under full lock the joints run at their steepest angle, so a front shaft that is tight at stock height can bind or vibrate on a lifted vehicle. Checking clearance at full steering in both directions is a good habit after any change in ride height.

Front joints usually wear faster than rear ones because they are exposed to more articulation and debris. Regular inspection of the joint caps and the slip spline is the simplest way to catch wear early. Keep the front differential and steering components in mind when diagnosing vibration, since a loose component can feel like a shaft problem.

  • Turn the steering to full lock and listen for binding
  • Inspect the front joint caps for leaks or cracks
  • Check the front differential mounting bolts for play

Specifications

Brand G2 Axle and Gear
Part number 92-2050-3
UPC 92205030005
Position Front
Driveshaft type Double Cardan CV
U-joint 1350
Tubing Heavy duty D.O.M.
Maximum lift height 6 inches
Tire size Up to 37 inches
Body style 2- and 4-door
Transmission Automatic

Vehicle fitment

This front shaft fits the Jeep Wrangler JK (2007-2018) in two- and four-door models with an automatic transmission.

Rear driveshafts in the G2 line, such as 92-2052-4 and 92-2052-7, are separate parts and are not this shaft. Other Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The fitment table indicates this front shaft needs no slip yoke eliminator. Because the maximum lift is 6 inches, check driveline angles after lifting the vehicle.

What’s included

One front Double Cardan CV drive shaft assembly. Inspect the delivered parts against your installation plan before starting.

SKU: G/292-2050-3 Category:

Specification

Shipping weight 29.00 lbs
Package dimensions 40.00 × 6.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is 92-2050-3 a front or rear driveshaft?

It is a front driveshaft. Its position is front, and the rear shafts in the G2 line are separate parts.

Does this front shaft fit two-door Wrangler JK models?

Yes. It fits two- and four-door Wrangler JK models with an automatic transmission. Match your year, model and trim before buying.

Does it need a slip yoke eliminator?

No. The fitment table indicates this front Double Cardan CV shaft does not require a slip yoke eliminator. Its U-joint is a 1350 size.

Do front driveshaft joints need regular lubrication?

Follow the joint type's service guidance. Many U-joints are sealed and are replaced rather than greased, so inspect the caps for leaks and check for play during routine service. Any play at the joint means the joint should be replaced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Drive Shafts on Amazon