Overview
The G2 Axle and Gear 92-2050-4 is a heavy duty front double cardan CV drive shaft for the 2007–2018 Jeep Wrangler JK, in an extended length. It is sold as a replacement shaft for 2-door and 4-door JK models.
The shaft is built with D.O.M. tubing and solid body U-joints, and it is dynamically balanced to reduce vibration. G2 recommends it for stock to 6 inch lift with tires up to 37 inch.
Key features
- Double cardan CV design
- D.O.M. tubing for strength
- Solid body 1350 U-joints
- Dynamically balanced to reduce vibration
- Extended length, front position
- Does not require a slip yoke eliminator
Driveline angles and lift
Driveline angle matters more as lift height increases, because the shaft works at a steeper angle and the U-joints carry more stress. A shaft set up for stock to moderate lift keeps vibration down when the axle sits where the factory designed it. Taller setups usually call for careful measurement and sometimes other driveline parts.
After installation, road test the vehicle at highway speed and listen for vibration or clunking on acceleration and deceleration. Check the U-joint straps and bolts after the first drives, and look for grease seepage at the joints. Tire size changes the axle position, so keep that in mind when comparing setups.
- Check driveline angle after any lift change
- Inspect U-joints for play
- Confirm the transfer case output matches the shaft
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 92-2050-4 |
| UPC | 631410130546 |
| Position | Front |
| Shaft type | Double cardan CV |
| Length | Extended |
| U-joint | 1350 |
| Transmission | Automatic |
| Body style | 2-door and 4-door |
| Recommended use | Stock to 6 inch lift |
| Tire size | Up to 37 inch |
| Slip yoke eliminator | Not required |
Vehicle fitment
The shaft fits 2007–2018 Jeep Wrangler JK models, in both 2-door and 4-door versions.
This shaft is for JK models. Compare the year, model and trim for any JL, TJ or LJ Wrangler before ordering.
Installation notes
The shaft is recommended for stock to 6 inch lift. On a taller lift, check driveline angles after installation.
What’s included
One front drive shaft assembly. Check the package contents against your installation before starting.


















