Overview
The G2 Axle and Gear 4-XJ4-456 is a 4.56 ratio front and rear ring and pinion kit for the Jeep Cherokee XJ. It fits 1984 to 2001 XJ Cherokee models and is built for a Dana 30 reverse front axle with a 3.73 and up carrier and a Dana 44 rear axle with a 3.91 and up carrier.
Both gear sets come in one kit, and the front and rear master installation kits are matched to their own axle. Because the kit covers both ends of the driveline, the front and rear gearing changes together, so the vehicle keeps a consistent ratio from end to end.
Key features
- Front and rear 4.56 ring and pinion sets in one kit
- Dana 30 reverse front axle, for carriers of 3.73 and up
- Dana 44 rear axle, for carriers of 3.91 and up
- Matched master installation kits for both axles
- Computer heat treated 8620 steel, double shot peened and double lapped
Gear setup and break-in
Changing ring and pinion gears changes how the engine turns the tires, so the new ratio should be set up carefully as a set. A 4.56 ratio gives more torque at the wheels for low speed work, crawling and larger tires, but it also raises engine speed at highway speed. Plan around that change in fuel use and cruising noise.
Setup matters as much as the gears themselves. Pinion depth and backlash need to be set with the carrier installed, and a proper contact pattern should be confirmed before the axle goes back together. Use fresh gear oil at the correct level, and drive gently during the first stretch so the gear surfaces can seat.
- Check the speedometer after a ratio change
- Confirm the carrier size before fitting
- Replace the pinion seal during the rebuild
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 4-XJ4-456 |
| UPC | 700007521811 |
| Gear ratio | 4.56 |
| Front axle | Dana 30 reverse, 3.73 and up carrier |
| Rear axle | Dana 44, 3.91 and up carrier |
| Material | Computer heat treated 8620 steel |
| Warranty | Limited lifetime |
Vehicle fitment
It fits 1984 to 2001 XJ Cherokee models with the Dana 30 reverse front and Dana 44 rear axle combination. The fit is based on those model years and the XJ name.
The 1984-2001 years cover the XJ generation only. Grand Cherokee models from the ZJ and WJ generations are outside these years and use different axle sets. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the carrier size before fitting the gears: the front kit is matched to a 3.73 and up carrier and the rear kit to a 3.91 and up carrier. Use the front and rear master installation kits together with their own gear sets, and set pinion depth and backlash after assembly.
What’s included
Front and rear 4.56 ring and pinion sets, with matched master installation kits for both axles.








