Overview
The G2 Dana 25/27/30 aluminum differential cover (part number 40-2031AL) is a front axle cover for Dana 25, 27 and 30 axles, except KJ applications. It is cast from lightweight aluminum to help dissipate heat from the gear oil.
The aluminum cover helps cool the gear oil, which supports longer bearing life. The aluminum is heat treated and shot peened to handle direct impacts, and it has a raw aluminum finish.
Key features
- Cast from lightweight aluminum to dissipate heat
- Reinforcing ribs for rigidity and strength
- Heat treated and shot peened to handle direct impact
- Fully machined seal surface for a leak-free installation
Before you buy
A differential cover does more than seal the axle housing. It keeps dirt, water and trail debris away from the ring and pinion, and its outer surface affects how well the gear oil sheds heat during long climbs and hot days. Aluminum conducts heat faster than stock covers, which is one reason owners who run larger tires or tow often choose it.
Before buying, make sure the cover suits your housing, since bolt patterns and fill arrangements vary between Dana variants. When you remove the old cover, inspect the gasket surface for pitting, warping or old gasket residue, and clean the mating face thoroughly before the new seal goes on.
- Clean both mating surfaces before reinstalling
- Use the gasket or sealant type suited to the cover
- Refill the gear oil to the level your axle requires
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2031AL |
| Axle location | Front |
| Axle types | Dana 25, Dana 27, Dana 30 JK, Dana 30 Reverse, Dana 30 Standard and Dana 30 TJ |
| Material | Aluminum |
| Oil capacity | Extra capacity |
| Finish | Raw aluminum |
Vehicle fitment
This cover is an axle part rather than a vehicle part, and it fits front Dana 25, 27 and 30 axles except KJ. Match the axle type on your vehicle before ordering.
Installation notes
The seal surface is fully machined, which G2 says gives a leak-free installation. Confirm the cover bolt pattern on your axle, since the cover must seat squarely on the machined surface.






















