Poison Spyder Customs
Showing 289–336 of 379 resultsSorted by popularity
-
Hood Vent
Poison Spyder Hood Louver – 17-53-011
- Bare aluminum Poison Spyder hood louver, part number 17-53-011
- Sold for 2 and 4-door Jeep hoods, no model years named
- CNC laser-cut and die-stamped aluminum
- Stainless fasteners and full-size template included
- Drilling and cutting of the hood required
SKU: PSC17-53-011 -
Body Corner Guard
Poison Spyder Stock Crusher Corners (Bare Steel) – 14-04-010
- Stock Crusher Corners in bare 3/16 inch plate steel
- Includes openings for the factory wheel and fuel filler
- Mounting holes for factory flares, tail light and license plate frame
- Stainless steel flat head cap screws; cutting or drilling required
SKU: PSC14-04-010 -
Rear Bumpers
Poison Spyder Brawler Full Width Rear Bumper with Shackle Tabs and Light Provisions (Bare) – 17-62-040-DL
Rear BumpersPoison Spyder Brawler Full Width Rear Bumper with Shackle Tabs and Light Provisions (Bare) – 17-62-040-DL
- Full width JK rear bumper, bare 3/16″ steel
- Reaches the outer edge of the stock flares
- Recessed LED pod light mounts and shackle tabs
- Integrated high clearance hitch receiver
SKU: PSC17-62-040-DL -
Tube Fenders
Poison Spyder Standard Crusher Corners with 5 Inch DeFender Flares (Bare Aluminum) – 14-04-075
Tube FendersPoison Spyder Standard Crusher Corners with 5 Inch DeFender Flares (Bare Aluminum) – 14-04-075
- Standard Crusher Corners with integrated 5 inch DeFender flare, part 14-04-075
- Made from 3/16 inch plate steel
- Larger TJ-style wheel opening
- Flat head stainless hardware and countersunk holes
- Provisions for flush-mounted LED taillights, sold separately
SKU: PSC14-04-075 -
Tail & Brake Lights
Poison Spyder JK LED Tail and Reverse Lights with Wiring Harnesses Kit – 41-08-010
Tail & Brake LightsPoison Spyder JK LED Tail and Reverse Lights with Wiring Harnesses Kit – 41-08-010
- Complete LED tail and reverse light kit for the 2007–2018 Jeep Wrangler JK, 2- and 4-door
- Plug and play connection to the Jeep OE wiring harness
- Two 4 inch 24-LED taillights and two 2-1/2 inch LED reverse lights
- Driver and passenger harnesses plus a back-up light extension harness
- Brand Poison Spyder Customs, part number 41-08-010
SKU: PSC41-08-010 -
Front Bumpers
Poison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Bare) – 17-63-010-DBT
Front BumpersPoison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Bare) – 17-63-010-DBT
- Poison Spyder Brawler Lite mid-width front bumper for Jeep Wrangler JK, part 17-63-010-DBT
- 3/16-inch plate steel, bare, with integrated winch mount and shackle tabs
- Recessed buckets for factory fog lamps
- Needs paint or powder coat before final installation
SKU: PSC17-63-010-DBT -
-
Skid Plates
Poison Spyder Customs Bruiser Front Skid Plate (Black) – 17-57-030P1
- Front skid for the Poison Spyder JK Bruiser front bumper
- Covers the factory crash bar and protects the swaybar disconnect motor on Rubicon JKs
- 3/16-inch CNC laser-cut plate steel with SpyderShell black finish
- Made for 2007-2018 Jeep Wrangler JK.
SKU: PSC17-57-030P1 -
-
Light Mounting Brackets & Cradles
Poison Spyder Hawse Fairlead 10 Inch Rigid LED Light Bar Mount (Black ) – 45-28-R10
Light Mounting Brackets & CradlesPoison Spyder Hawse Fairlead 10 Inch Rigid LED Light Bar Mount (Black ) – 45-28-R10
- Hawse fairlead light bar mount for a 10-inch Rigid LED light bar, black powder coat
- Mounts behind most hawse-type winch fairleads
- Can also hold a pair of Rigid Dually or Dually D2 lights; 3/16-inch steel plate
- Complete installation instructions included; UPC 614901728675
SKU: PSC45-28-R10 -
Skid Plates
Poison Spyder Extreme Duty Trans-Mount Cross Member (Bare Steel) – 18-56-025
- Fits 2012–2015 Jeep Wrangler JK, 2-door and 4-door
- Extreme duty trans-mount cross member in 3/16-inch steel
- Works with automatic and manual transmissions
- Bare steel, no cutting or drilling; part number 18-56-025
SKU: PSC18-56-025 -
Skid Plates
Poison Spyder Extreme Duty Trans-Mount Cross Member (Bare Steel) – 18-56-020
- Fits 2007-2011 Jeep Wrangler JK, 2-door and 4-door
- Extreme duty trans-mount cross member in 3/16-inch steel
- Works with automatic and manual transmissions
- Bare steel, no cutting or drilling; part number 18-56-020
SKU: PSC18-56-020 -
Replacement Tailgates
Poison Spyder Trail Gate – 14-66-010
- Bare aluminum Poison Spyder TrailGate, part number 14-66-010
- Drop-down gate that replaces a swing-out tailgate
- 3/16 inch aluminum plate, CNC laser-cut and brake-formed
- Lockable flush-mount latches with keys, all mounting hardware included
- Professional installation recommended
SKU: PSC14-66-010 -
Front Bumpers
Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) – 17-64-020-DBT
Front BumpersPoison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) – 17-64-020-DBT
- Brawler Full Width front bumper with Brawler Bar and shackle tabs for the Jeep Wrangler JK, 2-door and 4-door
- Brawler Bar from 1.5″ X .120 wall DOM tubing with 1.25″ OD tube gussets
- Full width, reaching the outer edge of stock flares
- Bare 3/16″ plate steel; Poison Spyder part 17-64-020-DBT
SKU: PSC17-64-020-DBT -
Tube Fenders
Poison Spyder Crusher Corners (Bare Steel) – 15-04-043
- Crusher corners built for the stretched Jeep LJ Wrangler with a 4-inch rear wheelbase stretch
- Built for the 2004–2006 Jeep Wrangler (LJ)
- 3-inch wide corners from 3/16-inch steel plate, with weld-on flares
- Allows up to a 40-inch tire; bare steel; cutting or drilling required
SKU: PSC15-04-043 -
-
Tube Fenders
Poison Spyder DeFender Vented Inner Fender Kit (Aluminum) – 14-02-080-V
- Vented aluminum inner fender kit that goes with Poison Spyder DeFender front fenders
- Three-piece bolt-together CNC laser cut aluminum sheet
- Vented for airflow through the engine bay; provides splash protection
- Requires DeFenders to install; UPC 614901724875
SKU: PSC14-02-080-V -
Tail & Brake Lights
Poison Spyder 4 Inch LED Tail Light – 41-04-050
- 4 in round, 24 diode LED tail light with a red lens
- Push-in mount; requires a 4-1/2 in round hole
- Clear lens available; it uses red diodes and still flashes red when lit
- Includes LED lamp assembly, rubber grommet and wiring pigtail harness
- Sold each
SKU: PSC41-04-050 -
Decals
Poison Spyder Windshield Decal in Black (Black) – 51-46-001-B
- Black die-cut vinyl windshield decal, about 48 by 4 inches
- Sized for the upper windshield section of Jeep CJ and Wrangler models
- Exterior grade vinyl, also suited to a rear window, motorhome or shop wall
- Universal fit decal
SKU: PSC51-46-001-B -
-
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 14-16-020-DC
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 14-16-020-DC
- Poison Spyder BFH front bumper with shackle tabs and Comp Stinger, bare steel, 14-16-020-DC
- Stinger extends 17.6″ forward and is 21.9″ high
- One piece of 3/16″ plate steel, no wider than the frame rails
- Integrated winch mount; shackle tabs from 1″ thick plate
SKU: PSC14-16-020-DC -
-
-
Bumper Hardware & Replacement Parts
Poison Spyder TJ Rear Bumper Brace Kit – 14-61-710
- Gussetted rear bumper brace in 3/16 inch steel plate for the Jeep TJ
- Recommended for towing and bumper-mounted recovery points or spare tire carriers
- Recommended for Poison Spyder RockBrawler and BFH TJ rear bumpers
SKU: PSC14-61-710 -
-
-
Front Bumpers
Poison Spyder BFH II Front Bumper with Trail Stinger in Black – PSC17-16-021-DSP1
- BFH II front bumper with Trail Stinger in black for the Jeep Wrangler JK, PSC17-16-021-DSP1
- Trail Stinger extends 13.4″ forward and is 17″ high, from 1.5″ X .120 wall DOM tubing
- SpyderShell semi-gloss black finish; recessed fog lamp buckets
- Integrated winch mount with two bolt patterns
SKU: PSC17-16-021-DSP1 -
Tube Fenders
Poison Spyder Stock Crusher Corners (Bare Steel) – 12-04-010
- Stock Crusher Corners in bare 3/16 inch plate steel
- Openings for the factory wheel and fuel filler
- Mounting holes for factory flares, tail light and license plate frame
- Stainless steel flat head cap screws; cutting or drilling required
SKU: PSC12-04-010 -
-
-
Tube Fenders
Poison Spyder Standard Crusher Corners (Bare Steel) – 13-04-073
- Standard crusher corners in bare steel with 3/16-inch plate and stainless hardware
- Includes provisions for flush-mounted LED taillights and the factory fuel filler opening
- 3-inch weld-on DeFender flares made from 3/16-inch plate steel
- Countersunk bolt holes and stainless flat head cap screws; UPC 614901724189
SKU: PSC13-04-073 -
Tail Light Guard
Trail Corners for 4″ LED Tail Lights
- Trail corners that protect the rear corners of a JK Wrangler Unlimited from rock damage
- Fits 2007–2017 Jeep Wrangler JK Unlimited and Rubicon Unlimited, 4-door models
- Cut for 4-inch round LED tail lights and 2-1/2 inch round LED back-up lights
- Made from 1/8-inch steel with black Spydershell powder coat
SKU: PSC18-06-021P1 -
Shock Mounts
Poison Spyder Upper Coil Over Mounts – 14-51-110
- Rear upper coilover mounts in bare steel for builder projects, designed for Daddy Longlegs
- Made from 3/16-inch plate steel for shocks with a 2-inch diameter body
- Upper tabs hold the shock bolt in double shear; welding required
- Builder component with no installation instructions; UPC 614901736335
SKU: PSC14-51-110 -
-
-
Front Bumpers
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs
- Brawler Lite front bumper with Trail Stinger and shackle tabs for the Jeep Wrangler JK, 2-door and 4-door
- Bare steel 3/16″ plate, grille-width and high clearance
- Trail Stinger from 1-3/4″ diameter DOM tubing with 1-1/4″ tube gussets
- Mounts without cutting the frame rails
SKU: PSC17-59-010-DST -
License Plate Frames and Covers
LED License Plate Holder and 3rd Brake Light
- LED license plate holder with a 3rd brake light, four high intensity red LEDs
- Brushed stainless steel bracket with Spyder web styling
- 6-foot extension harness with abrasion-resistant sheathing
- Weather-tight connectors for quick removal to reach the spare tire
SKU: PSC41-04-406 -
Hood Vent
Poison Spyder Hood Louver – 17-53-011-PC
- Black powder coated Poison Spyder hood louver, part number 17-53-011-PC
- Sold for 2 and 4-door Jeep hoods, no model years named
- CNC laser-cut and die-stamped, with stainless fasteners
- Full-size template and instructions included
- Drilling and cutting of the hood required
SKU: PSC17-53-011-PC -
-
License Plate Frames and Covers
Poison Spyder License Plate Mount – 18-04-012-02
- Moves the license plate to the center of the tailgate
- Uses four of the OE spare tire mount bolts
- Offset to clear the tailgate vents; no drilling required
- Steel with black powder coat, for 2 and 4-door Jeep Wrangler JK models
SKU: PSC18-04-012-02








































