Overview
The Poison Spyder Rocker Knockers with Sliders, bare steel, part number 15-08-045, are body-mounted rocker guards with a tubular slider, designed for the stretched Jeep LJ. The Daddy Longlegs version requires a 4 inch rear wheelbase stretch and is written for the Jeep LJ, 2004 to 2006. The armor allows up to a 40 inch tire.
These guards are built to match a stretched LJ and give wheel well to wheel well rocker protection, meaning the armor runs the full length between the front and rear wheel wells. Because the rocker knockers mount to the body tub, they keep their alignment when a body lift is installed.
Key features
- Designed for the stretched Daddy Longlegs LJ
- Requires a 4 inch rear wheelbase stretch
- Allows up to a 40 inch tire
- Wheel well to wheel well rocker protection
- Mounts to the body with no gap when a body lift is installed
- High strength DOM slider tubing welded to the rocker knocker with DOM tube spacers
Wheelbase and tire clearance
Body-mounted rocker guards sit between the wheel wells, so their fit depends on the body length and the tires you run. Longer wheelbases change the gap between the wheel wells, and taller tires move the wheel arch closer to the rocker. Measure the clearance at the front and rear wheel wells before choosing the tire size and cutting any body panels.
Slider tubing takes contact from rocks and trees, so inspect the welds and tube spacers after trail use. Look for bent tubing, cracked welds, and loose countersunk fasteners. Rust can form at the countersunk holes, so touch up bare steel with paint when the finish is damaged. Skids and sliders wear with use, and worn parts are easier to replace than the full guard.
- Measure wheel well clearance before tire selection
- Inspect slider welds after trail use
- Touch up bare steel at countersunk holes
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 15-08-045 |
| UPC | 614901735000 |
| Type | Formed plate guard with tubular standoff |
| Finish | Bare steel |
| Plate thickness | 3/16 inch high strength steel |
| Slider | High strength DOM structural tubing |
| Fasteners | Countersunk, stainless flat-head |
| Wheelbase requirement | 4 inch rear stretch |
| Maximum tire | 40 inch |
| Installation | Cutting or drilling required |
Vehicle fitment
These guards are written for the Jeep LJ, 2004 to 2006, in the stretched Daddy Longlegs configuration. The rockers require the 4 inch rear wheelbase stretch described above, so confirm your LJ has that stretch before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling, and the bolt holes are countersunk for the flat-head hardware. Because the rocker knockers are paired with the wheelbase stretch, confirm the stretch is in place before the armor is fitted.
What’s included
Rocker knockers with sliders, countersunk stainless flat-head hardware and mounting instructions.









