Overview
The Poison Spyder BFH II Rear Bumper with Shackle Tabs in bare steel, part number 14-61-030, is a frame cap style rear bumper that hugs the rear of the Jeep’s frame and crossmember. Poison Spyder says BFH stands for “Built For the Hammers”, designed for light weight, toughness and performance.
The bumper is CNC laser-cut from high strength 3/16″ plate steel and precision brake-formed for an exact fit over the frame and crossmember, with multiple angles and facets. Recovery shackle tabs CNC machined from 1″ thick plate steel are welded inside and outside the shell, and accept 3/4″ recovery shackles, also called D-rings.
It suits those who run without a spare or strap the spare down into the bed, because it has no spare tire carrier provisions.
The BFH II uses signature Poison Spyder styling with multiple angles and facets, so it is designed to look as good as it works.
Key features
- 3/16″ CNC laser-cut plate steel
- Frame cap style hugging the frame and crossmember
- Shackle tabs from 1″ thick plate steel for 3/4″ shackles
- No provisions for a spare tire carrier
- Universal mounting system with captured grade-8 hardware
- Bare steel only
Spare tire and rear recovery
A rear bumper without a spare carrier changes how you carry a tire on the trail. Plan where the spare will ride, whether strapped in the bed or stored elsewhere, and check that the strap does not rub on the bumper edges or tail lamps. Tire weight matters for strap points, so use anchors rated for the load.
Frame cap bumpers sit tight over the frame and crossmember, so the hardware and shackle tabs carry load in several directions. Use shackles that fit the 3/4 inch tab, keep the pin seated, and check the welds and bolts after heavy recoveries.
- Plan spare tire storage before installing
- Check strap clearance from the tail lamps
- Use strap anchors rated for the tire
- Re-check hardware after heavy recoveries
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-61-030 |
| UPC | 614901726213 |
| Part type | Rear bumper |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Shackle tabs | Included, 1″ thick plate steel, for 3/4″ shackles |
| Spare tire carrier | No provisions |
| Hardware | Captured grade-8 |
Vehicle fitment
It mounts to a Jeep frame using a universal mounting system. Confirm fit for your vehicle’s year, model and trim before ordering.
It may not fit every Jeep. Verify the match before ordering.
Installation notes
The bumper installs with captured grade-8 hardware and the Jeep’s existing bumper mounting holes. It is bare steel only and needs paint or powder coat before final installation.
What’s included
- Rear bumper with welded shackle tabs
- Captured grade-8 hardware
Not included: recovery shackles.
















