Poison Spyder Customs
Showing 193–240 of 379 resultsSorted by popularity
-
Replacement Tailgates
Poison Spyder Tailgate Hinge Delete Plates – 14-04-005
- Tailgate hinge delete plates in bare 6061-T6 aluminum
- Fill the hinge cut-outs in Crusher Corners or Trail Corners after the tailgate is removed
- Countersunk holes for the included stainless steel flat head cap screws
- Sold raw; paint or powder coat to match the corners
SKU: PSC14-04-005 -
Light Mounting Brackets & Cradles
Poison Spyder Roller Fairlead Light Bracket (Black ) – 45-28-010
- Black roller fairlead light bracket with two auxiliary light locations
- Attaches to the top of most roller winch fairleads
- CNC laser cut from 3/16-inch steel plate with textured black powder coat
- Includes stainless steel hardware and complete instructions; UPC 614901728644
SKU: PSC45-28-010 -
Light Mounting Brackets & Cradles
Poison Spyder Lower A-Pillar Light Mount Set (Black ) – 45-28-RDA
- Pair of lower A-pillar light mounts for the Jeep JK, black powder coat
- Designed for Rigid Industries Dually or Dually D2 LED lights
- Light mounting hole is 7/16 inch; other compact lights may fit
- Windshield hinge mounting type; rubber liners included
SKU: PSC45-28-RDA -
-
-
Decals
Poison Spyder JK Mountain Spyder Hood Decal in Black (Black) – 51-17-010-B
- Black Mountain Spyder hood decal for the Jeep Wrangler JK, two and four door models
- Large vinyl graphic that takes patience and skill to install
- No installation instructions included; a professional installer is suggested
SKU: PSC51-17-010-B -
Light Mounting Brackets & Cradles
Fog Light Mount Kit
- Poison Spyder fog light mount kit for Rigid Dually or D2 lights
- Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited
- Laser cut stainless steel, mounts in the stock JK fog light locations
- Includes plate, cover plate and hardware
SKU: PSCRIGID-DLYFOGMNT -
Light Mounting Brackets & Cradles
Poison Spyder Hawse Fairlead Light Mount (Black ) – 45-28-020
- Black hawse fairlead mount that adds two auxiliary light locations on winch-equipped Jeeps
- Mounts behind most hawse-type winch fairleads
- Designed to accept most aftermarket auxiliary lights; 3/16-inch steel plate
- Complete installation instructions included; UPC 614901728651
SKU: PSC45-28-020 -
-
CB Antennas & Mounts
Poison Spyder Antenna Mount – 17-28-A10
- Tailgate antenna mount for 2007–2018 Jeep Wrangler JK, 2-door and 4-door, with the spare tire carrier removed
- 1/8-inch steel, black powder coat, bolts on with two upper-right OE spare tire carrier bolts
- 1/2-inch mounting hole accepts standard CB antenna stud mounts
- Part number 17-28-A10; UPC 614901727081
SKU: PSC17-28-A10 -
-
-
-
Rear Bumpers
Poison Spyder RockBrawler Hi-Lift Jack Mount (Bare) – 45-61-010
- Hi-Lift jack mount for the Poison Spyder RockBrawler Rear Bumper with Tire Carrier
- Bare steel plate, CNC laser cut from 3/16″ steel
- Grade 8 hardware for the carrier; 1/2″ carriage bolts with urethane bushings for the jack
- Wing nuts and nylock nuts provided
SKU: PSC45-61-010 -
Tailgate Covers and Storage
Poison Spyder Tramp Stamp (Black Powder Coat Steel) – 14-04-011
- Tramp Stamp panel that fills the lower area between the tailgate and bumper
- Designed for Jeep YJ, TJ and LJ Wranglers
- Cut from high strength, lightweight aluminum plate with the Poison Spyder logo
- Installs with supplied black truss-head pop-rivets
SKU: PSC14-04-011 -
Flasher
Poison Spyder LED 5 Pin Flasher – 41-04-106
- Poison Spyder LED 5-pin flasher, part number 41-04-106, for LED taillights and turn signals
- Needed after LED taillights go in, to stop the fast turn signal
- Plug and play with no soldering; instructions included
- Made for use on a Jeep; confirm year and model before ordering
SKU: PSC41-04-106 -
-
-
Tail & Brake Lights
Poison Spyder Tail Light Harness – 41-06-010-D
- Driver-side LED tail light harness from Poison Spyder Customs, part number 41-06-010-D
- Plug-and-play connection to the Jeep OE wiring harness and to Poison Spyder LED tail lights
- Copy names the Jeep Wrangler JK; the fitment field reads universal fit
SKU: PSC41-06-010-D -
Tailgate Covers and Storage
Poison Spyder Tramp Stamp II (Black Powder Coat Steel) – 18-04-012-01
- Tramp Stamp II with a cutout that keeps the wide tailgate vent working
- Fits Jeep JK tailgates with the wide vent, generally 2010 and newer
- 1/8-inch aluminum plate, black powder coat, no drilling needed
- Not a direct fit for the tall vent found on 2007–2009 JKs
SKU: PSC18-04-012-01 -
Tube Fenders
Poison Spyder DeFender Full Length Side Plates (Aluminum) – 14-02-052
- DeFender full length side plates in bare 3/16 inch 6061-T6 aluminum
- Extra bracing against frontal impacts for the DeFender
- Countersunk holes for flush stainless steel hardware
- Spyder logo cut-out; for use with DeFender flares
SKU: PSC14-02-052 -
Fender Liner
Poison Spyder DeFender XC Inner Fenders (Aluminum) – 14-02-099
- Bare aluminum panels cut from CNC laser cut sheet
- Three-piece bolt-together assembly for each fender
- Splash protection for the engine compartment and room for under-hood accessories
- No accessory mounting holes or brackets included
- Sized for an engine compartment, with no specific vehicle tied to it
SKU: PSC14-02-099 -
Body Corner Guard
Poison Spyder Trail Corner (Bare Steel) – 13-06-010-PC
- Trail Corner body guard in 3/16 inch steel
- Pre-cut gas filler, taillight and license plate holes
- Works with OEM taillights; original license plate hardware can be re-used
- Finish to confirm before ordering if color matters
SKU: PSC13-06-010-PC -
Tube Fenders
Poison Spyder Trail Corner (Black) – 15-06-010-PC
- Poison Spyder Trail Corner in black, 3/16 inch steel, part number 15-06-010-PC
- Stainless steel button head hardware included
- Works with OEM taillights; original license plate hardware can be reused
- No model years are listed; the installation type is cutting or drilling required
SKU: PSC15-06-010-PC -
Tube Fenders
Poison Spyder DeFender XC Vented Inner Fender Kit (Aluminum) – 14-02-099-V
- Vented aluminum inner fender kit for Poison Spyder DeFender XC front fenders
- Three-piece bolt-together assembly, CNC laser cut from aluminum sheet
- Vented for engine bay airflow, with splash protection and a mount for under-hood accessories
- Requires DeFender XC fenders to install; UPC 614901724950
SKU: PSC14-02-099-V -
-
Skid Plates
Poison Spyder Steering Box Skid Plate (Black) – 14-15-020
- Steering box skid plate for Jeep models, 3/16-inch high pressure steel
- Satin black powder coat for appearance and corrosion resistance
- Complete mounting hardware; some original hardware is reused
- No cutting or drilling required
SKU: PSC14-15-020 -
-
Tail & Brake Lights
Poison Spyder 4 Inch LED Tail Light – 41-04-051
- Fits a 4-1/2 inch round hole in a flat panel, the cutout used by Poison Spyder Crusher Corners and Trail Corners
- 24-diode LED lamp in a 4 inch round housing, red or clear lens
- Push-in mounting with a rubber grommet, no fasteners listed
- Includes the wiring pigtail harness; sold individually
SKU: PSC41-04-051 -
Jack Mount Kits
Poison Spyder RockBrawler II Hi-Lift Jack Mount – 45-61-011
- Mounts a Hi-Lift jack to the RockBrawler II Rear Bumper with Tire Carrier
- CNC laser cut from 1/4 inch plate steel with the Spyder web design
- Attaches with 1/2 inch carriage bolts and urethane isolator bushings
- Ships bare steel for paint or powder coat
SKU: PSC45-61-011 -
-
-
-
Skid Plates
Poison Spyder JK Brawler MID Front Skid in Bare Steel (Bare Steel) – 17-63-030
- Fits the 2007–2018 Jeep Wrangler JK, per the JK Brawler MID title
- Mid-width, high-clearance front skid in 3/16-inch plate steel
- Accepts most Warn winches and 3/4-inch recovery shackles
- Bare steel only; part number 17-63-030
SKU: PSC17-63-030 -
Tailgate Covers and Storage
Poison Spyder Tramp Stamp (Black Powder Coat Steel) – 18-04-011
- Tramp Stamp panel that fits over the raised vent area in the center of a JK tailgate
- Fits Jeep JK Wranglers, 2-door and 4-door models
- Black powder coat, CNC laser cut, bolts on with the stock tire carrier bolts
- Holes and rivets included for mounting a license plate to the panel
SKU: PSC18-04-011 -
Tailgate Covers and Storage
Poison Spyder Tramp Stamp II with License Plate Mount (Black Powder Coat Aluminum) – 18-04-013
Tailgate Covers and StoragePoison Spyder Tramp Stamp II with License Plate Mount (Black Powder Coat Aluminum) – 18-04-013
- Tramp Stamp II tailgate panel with a license plate mount, black powder coat aluminum
- Designed for the tall vent on 2007–2009 Jeep JK tailgates
- Opening keeps the tailgate vent working; 1/8-inch aluminum plate
- Bolts on using the spare tire mount bolts
SKU: PSC18-04-013













































