Overview
The Poison Spyder Brawler Lite front mid-width bumper with Brawler Bar and tube gussets, part number 17-63-010-DBT, is a bare steel front bumper for the Jeep Wrangler JK (2007-2018). The bumper is a mid-width, high clearance design with an integrated winch mount and shackle tabs.
Poison Spyder fabricates the bumper from 3/16-inch plate steel, CNC laser-cut and precision brake-formed into a low profile shape. The ends reach farther outboard than the narrower Brawler Lite, to about half the width of the tires, which adds protection to the grille corners and fenders and gives the Jeep a more expeditionary look than Poison Spyder’s rock-crawling bumpers. The ends still protect the lower corner of the JK grille, and recessed buckets hold the factory fog lamps.
Key features
- Mid-width, high clearance design
- 3/16-inch plate steel, CNC laser-cut and brake-formed
- Ends extend to about half the tire width for grille corner and fender protection
- Recessed buckets for the factory fog lamps
- Integrated winch mount
- Shackle tabs included
- Brawler Bar stinger and tube gussets
- Supplied as bare steel for finishing
Finishing bare steel
Bare steel rusts from the inside out if moisture gets trapped, so a bumper supplied in bare steel needs paint or powder coat before it goes on the vehicle. Clean the steel, remove any mill scale and shop oil, and apply a primer suited to steel. Pay attention to the welded seams and the edges of the tab holes, which are the first places rust appears.
A winch, shackles and fog lamp buckets are common add-ons for a mid-width bumper, so plan their placement before finishing. Fit the winch to the integrated plate and check that the bumper clears the grille and fenders at full turn. After rough trail days, check the bolts, the bumper edges and the coating for chips and touch them up.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-63-010-DBT |
| UPC | 614901727418 |
| Product | Front bumper, mid-width |
| Material | Steel plate, 3/16 in |
| Finish | Bare steel |
| Width | Stubby (mid-width) |
| Body styles | 2 and 4-door models |
| Fit type | Direct fit |
| Winch mount | Integrated |
| Light mounts | Recessed buckets for factory fog lamps |
| D-ring mount | Shackle tabs included |
Vehicle fitment
It is the Brawler MID front bumper for the 2007-2018 Jeep Wrangler JK, in 2- and 4-door models.
It is for the JK generation only and does not fit the TJ, LJ or JL Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bumper is supplied as bare steel and must be painted or powder coated before final installation. Poison Spyder does not offer a powder coat option for it. A winch is mounted on the integrated winch plate.
What’s included
- Mid-width front bumper with integrated winch mount
- Shackle tabs
- Brawler Bar and tube gussets
Not included: a winch, paint or powder coat, and shackles.


















