Select your vehicle

Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) – 17-64-020-DBT

Poison Spyder Customs

Shop Jeep Wrangler JK Front Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Brawler Full Width front bumper with Brawler Bar and shackle tabs for the Jeep Wrangler JK, 2-door and 4-door
  • Brawler Bar from 1.5″ X .120 wall DOM tubing with 1.25″ OD tube gussets
  • Full width, reaching the outer edge of stock flares
  • Bare 3/16″ plate steel; Poison Spyder part 17-64-020-DBT

Description

Overview

The Poison Spyder 17-64-020-DBT is the Brawler Full Width front bumper with a Brawler Bar and shackle tabs for the Jeep Wrangler JK (2007-2018), in bare steel. It fits 2-door and 4-door models and suits owners who want to keep their stock JK fender flares.

The bumper runs to the full width of the stock flares, blending in with them and protecting them from trail hazards. It is made from 3/16″ plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance form. The Brawler Bar is built of 1.5″ X .120 wall DOM tubing with 1.25″ OD X .120 wall DOM tube gussets, and the recessed light buckets accept OE fog lamps or Rigid Industries Duallys with an adapter plate.

Key features

  • Full-width, multi-faceted design that protects the lower grille
  • Extends to the outer edge of the stock flares
  • 3/16″ plate steel, CNC laser-cut and brake-formed
  • Brawler Bar from 1.5″ X .120 wall DOM tubing
  • 1.25″ OD X .120 wall DOM tube gussets
  • Recessed light buckets for OE fog lamps or Rigid Duallys with an adapter plate
  • High clearance shackle tabs CNC machined from 1″ thick plate steel

Planning a bare steel build

A front bumper changes how a Wrangler meets obstacles and how the grille and lights sit, so think through the parts that go with it before install day. Because this bumper arrives unpainted, the finish is the first job. Paint or powder coat every face and cut edge before the bumper goes on, so no surface gets missed in a tight spot under the truck.

Many owners who add a bumper also plan for a winch, recovery points and auxiliary lights. Each of those adds load and wiring, so decide early which accessories you want. Wire lights with a fused relay and run cables away from sharp edges and moving parts. Recheck the frame bolts after the first few trail runs, since a heavy front end can work fasteners loose over time.

  • Clean and dry steel before coating
  • Touch up chips early to slow rust
  • Check fender flare edges for rubbing after install

Specifications

Brand Poison Spyder
Part number 17-64-020-DBT
UPC 614901751215
Type Brawler Full Width front bumper with Brawler Bar and shackle tabs
Material 3/16″ plate steel
Finish Bare steel
Brawler Bar tubing 1.5″ X .120 wall DOM
Gussets 1.25″ OD X .120 wall DOM tube
Shackle tab stock 1″ thick plate steel
Body styles 2-door and 4-door

Vehicle fitment

It is built for the Jeep Wrangler JK, 2007-2018, and is designed around the stock JK fender flares.

It is built around the stock JK flares and does not cover other Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The bumper is bare steel and has to be painted or powder coated before final installation. Poison Spyder does not yet offer a powder coat option for this item. Adapter plates for Dually lights are available separately.

What’s included

  • Full width front bumper with Brawler Bar
  • Recovery shackle tabs
  • Recessed fog light buckets

Not included: paint or powder coat, an adapter plate for Dually lights, and any winch.

SKU: PSC17-64-020-DBT Category:

Specification

Shipping weight 90.00 lbs
Package dimensions 75.00 × 21.00 × 16.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is the Brawler Bar on the 17-64-020-DBT made of?

The Brawler Bar is made of 1.5" X .120 wall DOM tubing with 1.25" OD X .120 wall DOM tube gussets, and it comes with the full width bumper and shackle tabs.

Does the 17-64-020-DBT keep my stock JK flares?

Yes. The bumper extends to the full width of the stock flares, blending with them and protecting them from trail hazards.

Is the 17-64-020-DBT painted?

No. It comes as bare steel and needs paint or powder coat before final installation. Poison Spyder does not yet offer a powder coat option for it.

What lights fit the 17-64-020-DBT buckets?

The recessed buckets accept OE fog lamps, or Rigid Industries Dually lights with an adapter plate that is available separately.

Do I need a winch to use this bumper?

No. A winch is not included, so it is a separate purchase. If you plan to add one later, settle the winch and its wiring before finishing the steel, so the coating covers the final mounting surfaces.

How should I care for the bare steel bumper?

Paint or powder coat the bumper before it goes on the truck and seal any cut edges. Rinse off mud and salt after trail use, dry the steel, and touch up any chips quickly to slow surface rust. Check the mounting bolts now and then.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Front Bumpers on Amazon