Overview
The Poison Spyder JK RockBrawler II Rear Bumper in bare steel, part number 17-62-010, is a 3/16″ plate steel rear bumper with an integrated 2″ receiver and provisions for recessed backup lamps. It fits 2-door and 4-door models.
The RockBrawler II is the second generation of the rear bumper, with a high clearance, multi-faceted design. Changes were based on customer requests and use of the original RockBrawler on trails.
The bumper is bare steel and needs to be painted or powder coated before final installation. Poison Spyder does not offer a powder coat option.
Key features
- High clearance multi-faceted design
- 3/16″ plate steel
- Integrated 2″ receiver
- Provisions for recessed backup lamps
- Bare steel
- Improvements over the original RockBrawler
Finishing bare steel parts
Bare steel bumpers rust quickly at welds and cut edges if they are left unfinished, so cleaning and coating come before the bumper is mounted. Degrease the surface, remove mill scale, and use a primer suited to steel before the topcoat. A powder coat shop or a rattle-can system both work when the surface is prepped well.
Rear bumpers take the most abuse from rocks and tree limbs, so inspect the mounting plates and the receiver tube after rough trips. Look for cracked paint at bends, loose bolts and bent tabs. A small chip repaired early keeps the steel from rusting under the coating.
- Clean and degrease before priming
- Coat the receiver opening to keep moisture out
- Check hitch pin fit after each coating
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-62-010 |
| UPC | 614901727357 |
| Part type | Rear bumper |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Receiver | Integrated 2″ |
| Backup lamps | Provisions for recessed lamps; lamps not included |
| Tire carrier | No |
| Body styles | 2-door and 4-door |
Vehicle fitment
Poison Spyder names this bumper for the JK, covering the 2007–2018 Jeep Wrangler (JK), 2-door and 4-door, based on the title.
The original RockBrawler 17-61-010 and other Wrangler generations are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Paint or powder coat the bare steel before final installation.
What’s included
Not included: backup lamps.














