Rock Sliders and Guards
Showing 1–48 of 142 results
-
-
Rock Sliders and Guards
Smittybilt XRC Rock Sliders with Step (Black) – 76897
- XRC Rock Slider
- Finished in a Two-Stage Matte Black Powdercoat
- Bolt-On Installation
- Manufactured from 3/16 inch solid plate
- Designed to form to the vehicle and protect your ride from the elements
- 5 year finish warranty
- Includes step
- Sold As A Pair
SKU: S/B76897 -
-
Rock Sliders and Guards
Smittybilt Rock Crawler Side Armor (Black) – 76634
- 4-door models
- One-piece design – manufactured from 1.75″ .120 wall tubing
- Dual girder system provides the ultimate protection for the sides and under section of your wrangler
- Provides protection and a step at the same time
- Bolts up without drilling or modifications to the vehicle
- Wheel to wheel for maximum protection
- Finished in the signature series matte black textured powder coat
SKU: S/B76634 -
Rock Sliders and Guards
Smittybilt M1 Sliders – 616850
- Aggressive style
- One piece design
- Manufactured from 1.75 inch .120 wall tubing
- Provides protection and a step at the same time
- Bolts up without drilling or modifications to the vehicle
- Wheel to wheel for maximum protection
- 1/8 inch steel platform CNC and dimpled steps
- Dual purpose rear slider flare for added rear wheel protection
- Rear step point to access front of bed
- Finished in the signature series matte black textured Powdercoat
SKU: S/B616850 -
-
-
Rock Sliders and Guards
Poison Spyder DIY Slider Tube Kit – 53.75 (Bare Steel) – DIY-08-030
- Main tubes measure 53.75 inch long
- Kit includes the slider tubes as well as the short tube supports
- Does both sides of Jeep
- Slider tube pieces are CNC bent and pre-notched to mount at an angle
- Welding required
SKU: PSCDIY-08-030 -
Rock Sliders and Guards
Poison Spyder DIY Slider Tube Kit – 44.25 (Bare Steel) – DIY-08-020
- Bare steel
- Main tubes measure 44.25 inch long
- Kit includes the slider tubes as well as the short tube supports
- Does both sides of the Jeep
- Tube pieces are CNC bent and pre-notched to mount at an angle
- Welding required
SKU: PSCDIY-08-020 -
Rock Sliders and Guards
Poison Spyder Brawler Rockers in Black Powder Coat (Black) – 17-08-200P1
- 2-door models
- Black powder coat
- Two-piece inchmini-boatside inch style rocker armor
- 3/16 inch plate steel
- All fastener holes are countersunk
- Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail
- Angled facets that allow up to a 40 inch tire
SKU: PSC17-08-200P1 -
Rock Sliders and Guards
Poison Spyder Brawler Rockers in Aluminum (Bare Aluminum) – 17-08-200-ALUM
- 2-door models
- Aluminum
- Two-piece inchmini-boatside inch style rocker armor
- 3/16 inch thick aluminum plate
- All fastener holes are countersunk
- Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail
- Angled facets that allow up to a 40 inch tire
SKU: PSC17-08-200-ALUM -
Rock Sliders and Guards
Poison Spyder Brawler Rockers in Bare Steel (Bare Steel) – 17-08-200
- 2-door models
- Bare steel
- Two-piece inchmini-boatside inch style rocker armor
- 3/16 inch plate steel
- All fastener holes are countersunk
- Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail
- Angled facets that allow up to a 40 inch tire
SKU: PSC17-08-200 -
Rock Sliders and Guards
Poison Spyder Frame-Mounted Rocker Knockers (Bare Steel) – 17-08-030
- CNC laser cut from 3/16 inch plate steel
- Slider rail is fabricated from CNC-bent 1.5 inch x .120 wall DOM tubing
- Main tube of the rocker knocker is filled with a CNC laser-cut slider skid
- Features poison spyders exclusive oval dimples for structural strength
- Slider and skid mount at an angle to the main tube of the rocker knocker to provide boatside-like protection from the rocks
- Bolt on or weld on installation
SKU: PSC17-08-030 -
Rock Sliders and Guards
Poison Spyder Rocker Knockers with Sliders (Bare Steel) – 17-08-020
- 2-door models
- CNC laser cut from 3/16 inch plate steel
- Slider rail is fabricated from CNC-bent 1.5 inch x .120 wall DOM tubing
- Features Poison Spyders exclusive oval dimples for structural strength
SKU: PSC17-08-020 -
Rock Sliders and Guards
Poison Spyder Rocker Knockers with Sliders (Bare Steel) – 15-08-060
- High strength 3/16 inch plate steel
- Bolt holes are countersunk
- Stainless steel flat head hardware
- Mounts to the body itself – no resulting gap or misalignment when a body lift is installed
- Slider is high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers
SKU: PSC15-08-060 -
-
Rock Sliders and Guards
Poison Spyder Rocker Knockers with Sliders (Bare Steel) – 13-08-050
- Bare steel
- For use with TJ fender flares
- High strength 3/16 inch plate steel
- Bolt holes are countersunk
- Stainless steel flat head hardware
- Mounts to the body itself – no resulting gap or misalignment when a body lift is installed
- Slider is high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers
SKU: PSC13-08-050 -
Rock Sliders and Guards
Poison Spyder Rocker Knockers (Bare Steel) – 13-08-040
- Bare steel
- For use with TJ fender flares
- High strength 3/16 inch plate steel
- Bolt holes are countersunk
- Stainless steel flat head hardware
- Mounts to the body itself – no resulting gap or misalignment when a body lift is installed
SKU: PSC13-08-040 -
Rock Sliders and Guards
Poison Spyder Rocker Knockers with Sliders (Bare Steel) – 12-08-020
- Bare steel
- High strength 3/16 inch plate steel
- Bolt holes are countersunk
- Stainless steel flat head hardware
- Mounts to the body itself – no resulting gap or misalignment when a body lift is installed
- Slider is high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers
SKU: PSC12-08-020 -
Rock Sliders and Guards
Poison Spyder Ricochet Rockers (Bare Steel) – 11-50-010
- Bare steel
- Secured with counter sunk 3/8 inch stainless hardware
- 5 inch dimpled plate that acts as a step and a stout reinforcement for the slider
- Dual tube support and slider bar is constructed of 1.5 inch DOM tubing
- Step and corner gussets are CNC laser cut from 3/16 inch steel plate
SKU: PSC11-50-010 -
Rock Sliders and Guards
Poison Spyder Rocker Knockers with Sliders (Bare Steel) – 11-08-020
- Bare steel
- High strength 3/16 inch plate steel
- Bolt holes are countersunk
- Stainless steel flat head hardware
- Mounts to the body itself – no resulting gap or misalignment when a body lift is installed
- Slider is high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers
SKU: PSC11-08-020 -
-
-
Rock Sliders and Guards
Poison Spyder Ricochet Rockers (Bare Steel) – 15-50-050
- Bare steel
- Secured with counter sunk 3/8 inch stainless hardware
- 5 inch dimpled plate that acts as a step and a stout reinforcement for the slider
- Dual tube support and slider bar is constructed of 1.5 inch DOM tubing
- Step and corner gussets are CNC laser cut from 3/16 inch steel plate
SKU: PSC15-50-050 -
Rock Sliders and Guards
JcrOffroad Classic Rock Sliders (Black) – JLSL-CL-4D-PC
- 18-Current Wrangler JL, 4-Door
- Black powder coat finish
- Cut and formed from 2x2x3/16″ box tubing
- 1-3/4″ angled round outer tubing
- Includes mounting hardware
- Sold as a pair
- Hand built in the USA
- Not compatible with body lifts
SKU: JCRJLSL-CL-4D-PC -
Rock Sliders and Guards
Smittybilt Atlas XRC Rock Slider with Step (Light Texture Finish) – 76898LT
- Light texture black finish
- Bolt-on installation
- Manufactured from 3/16 inch solid plate
- Designed to form to the vehicle and protect your ride from the elements
- 5 year finish warranty
- Will not work with XRC Armor fenders part numbers S/B76880, S/B76881 or S/B76882
SKU: S/B76898LT -
Rock Sliders and Guards
Smittybilt Rock Crawler Side Armor (Light Texture Finish) – 76633LT
- 07-Current Wrangler JK, 2 Door
- Light texture black finish
- One piece design – manufactured from 1.75″ .120 wall tubing
- Dual girder system provides the ultimate protection for the sides and under section of your Wrangler
- Provides protection and a step at the same time
- Bolts up without drilling or modifications to the vehicle
- Wheel to wheel for maximum protection
SKU: S/B76633LT -
Rock Sliders and Guards
Poison Spyder Brawler Rockers in Black Powder Coat (Black) – 18-08-200P1
- 4-door models
- Black powder coat
- Two-piece “mini-boatside” style rocker armor
- 3/16″ plate steel
- All fastener holes are countersunk
- Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail
- Angled facets that allow up to a 40″ tire
SKU: PSC18-08-200P1 -
Rock Sliders and Guards
Smittybilt Rock Crawler Side Armor (Light Texture Finish) – 76634LT
- 07-Current Wrangler JK, 4 Door
- Light texture black finish
- One-piece design – manufactured from 1.75″ .120 wall tubing
- Dual girder system provides the ultimate protection for the sides and under section of your wrangler
- Provides protection and a step at the same time
- Bolts up without drilling or modifications to the vehicle
- Wheel to wheel for maximum protection
SKU: S/B76634LT -
Rock Sliders and Guards
Smittybilt SRC Rocker Guard (Light Texture Finish) – 76645LT
- 07-Current Wrangler JK, 2 Door
- Light texture black finish
- With perforated filler plate
- Heavy-duty 2″ steel tubing
- Features an upper tube for side protection
- 3/16″ protective plating for extra protection
SKU: S/B76645LT -
Rock Sliders and Guards
Smittybilt XRC Rock Sliders with Step (Light Texture Finish) – 76897LT
- 07-Current Wrangler JK, 2 Door
- Light texture black finish
- Bolt-on installation
- Manufactured from 3/16 inch solid plate
- Designed to form to the vehicle and protect your ride from the elements
- 5 year finish warranty
- Will not work with XRC Armor fenders part numbers S/B76880, S/B76881 or S/B76882
SKU: S/B76897LT -
-
Rock Sliders and Guards
Poison Spyder Ricochet Rockers (Bare Steel) – 13-50-050
- Bare steel
- For use with TJ fender flares
- Secured with counter sunk 3/8″ stainless hardware
- 5″ dimpled plate that acts as a step and a stout reinforcement for the slider
- Dual tube support and slider bar is constructed of 1.5″ DOM tubing
- Step and corner gussets are CNC laser cut from 3/16″ steel plate
SKU: PSC13-50-050
