Front Bumpers
Showing 1–48 of 49 results
-
Front Bumpers
Smittybilt SRC Gen2 Front Bumper Package (Black) – BMPRPKG2.1
- 2 and 4-door models
- Textured black powdercoat
- OE fog light provision
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- 2 inch x .120 inch wall 2 inch Class III Receiver
- New max solid D-ring and jack point mount – welded on the inside and out
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
SKU: S/BBMPRPKG2.1 -
Front Bumpers
Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) – 76892
Front BumpersSmittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) – 76892
- 2 and 4-door models
- Factory 10th Anniversary Rubicon lights will not Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Two stage textured matte black finish
- Manufactured from 3/16 cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
SKU: S/B76892 -
Front Bumpers
Smittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) – 76800
Front BumpersSmittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) – 76800
- 2-stage Textured black powder coat
- Degree approach angles and raised corners
- 3/16″ cold rolled steel
- Stinger is 1.75″ tubing
- Accepts up to two 9″ lights
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
SKU: S/B76800 -
Front Bumpers
Smittybilt SRC Gen2 Front Bumper – Black Textured (Black) – 76724
- 2 and 4-door models
- Factory 10th Anniversary Rubicon lights will not New max solid d-ring and jack point mount – welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender to fender protection
- 2″ 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- Stock fog light provision
- Manufactured from 3/16″ cold rolled steel
- Tow-able D-ring mounts
- Two-stage textured matte black powder coat finish with 5-year limited warranty
- Smittybilt Advantage limited lifetime warranty
SKU: S/B76724 -
Front Bumpers
Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts (Black) – 76721
- Textured black powdercoat
- Four taps to mount lights
- Wide opening allows for winch installation
- 1/4 inch thick custom mounting brackets
- Welded D-ring tabs
- Durable 2 inchx.120 inch wall over built
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
SKU: S/B76721 -
Front Bumpers
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Black) – 17-59-010DBP1
Front BumpersPoison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Black) – 17-59-010DBP1
- 2 and 4-door models
- Black powder coat
- 3/16 inch plate steel
- Mid-width high clearance bumper
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamps
- Integrated winch mount
- Brawler bar is 1-3/4 inch diameter .120 inch wall DOM tubing
- Shackle tabs made of 1 inch thick plate steel
SKU: PSC17-59-010DBP1 -
-
-
Front Bumpers
Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Black) – JK07-D1852-1
- 2 and 4-door models
- 2 Stage Black Powder Coat
- 12 gauge US Steel
- High and tight Lightweight design
- Accepts a 20 inch light bar in center, light bar sold separately
- Mounting options on each side for (2) 2×2 LED lights to give you maximum LED light coverage
- Will not accept a winch
- Made in the U.S.A
SKU: FFIJK07-D1852-1 -
Front Bumpers
Fab Fours Front Full Width Truck Grumper (Black) – GR4100-1
- 17-Current Ford SuperDuty F-250/F-350
- Combines both grille and bumper
- Provides greater tire clearance
- Aggressive Styling
- Fully customizable with a 13 piece modular design . Strategically placed cutouts for maximaum airflow. Mounting options on each side for (2) 2×2 Dually lights to give you maximum LED light coverage (Lights not included)
- Integrated Adaptive Cruise Control Mount
- Engineered to work with up to a 12,000lb Warn Zeon Winch (only tested with Warn Zeon)
- Complete bolt-on Installation with stainless steel hardware and provided brackets that tie directly to the frame
- 2 Stage Matte Black Powder Coat
- 3/16″” Steel winch tray
- 11 ga. U.S. Steel Construction
- 100% Made in the USA
- **US PATENTED**
SKU: FFIGR4100-1 -
Front Bumpers
Fab Fours Vengeance Front Pre-Runner Bumper (Black) – CH15-V3052-1
- 2 Stage Black Powder Coat
- Overall design and The Vengeance Series front bumper is sensor compatible
- Allows for an integrated 20″ LED light bar in the center (light bar not included)
- Mounting options on each side for (2) 2×2 Dually lights to give you maximum LED light coverage
- Lower cutout to provide airflow to intercoolers
- Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
- Sensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care.
SKU: FFICH15-V3052-1 -
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 14-16-020-DS
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 14-16-020-DS
- Bare steel
- 3/16″ plate steel
- No wider than frame rails
- Stinger extends 13.4″ forward from the front edge of the bumper
- 17″ high from the top surface of the bumper
- Shackle tabs are 1″ thick plate steel
SKU: PSC14-16-020-DS -
-
Front Bumpers
Poison Spyder BFH II Front Bumper with Trail Stinger in Black – PSC17-16-021-DSP1
- Lightweight, high clearance “stubby” bumper design
- “Trail Stinger” made of 1.5″ X .120″ wall DOM tubing with 3/16″ plate steel gussets
- SpyderShell Armor Coat semi-gloss black finish
- Recessed light buckets accept OE fog lamps or Rigid Industries Dually’s by use of adapter plate (sold separately)
- High clearance recovery shackle tabs CNC machined from 1″ thick plate steel
SKU: PSC17-16-021-DSP1 -
-
Front Bumpers
Smittybilt SRC Ultra Classic Rock Crawler Front Bumper with Winch Plate and D-ring Mounts (Black) – 76743
Front BumpersSmittybilt SRC Ultra Classic Rock Crawler Front Bumper with Winch Plate and D-ring Mounts (Black) – 76743
- 2 and 4-door models
- Two stage matte Black powder coat finish
- Manufactured from 3/16 cold rolled steel plate
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
SKU: S/B76743 -
Front Bumpers
Poison Spyder Customs Bruiser MID Front Bumper (Black) – 17-55-010DBTP1
- 07-Current Wrangler JK, 2 & 4 Door
- Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires
- Recessed winch mount
- Brawler Bar made of DOM tubing with tube gussets
- SpyderShell™ Armor Coat semi-gloss black finish
- Recessed light mounts accept LED cube lights
SKU: PSC17-55-010DBTP1 -
Front Bumpers
Poison Spyder BFH Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-16-020-DB
- Bare steel
- 3/16″ plate steel
- No wider than the frame rails
- Brawler Bar extends 7.4″ forward from the front edge of the bumper
- 9.8″ high from the top surface of the bumper
- Shackle tabs are 1″ thick plate
SKU: PSC14-16-020-DB -
Front Bumpers
Poison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-59-010-DB
Front BumpersPoison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-59-010-DB
- Bare steel
- Mid-width high clearance bumper
- 3/16″ plate steel
- CNC laser-cut
- Extends far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access
SKU: PSC14-59-010-DB -
Front Bumpers
Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black Black – 76740D
Front BumpersSmittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black Black – 76740D
- Two stage matte Black powder coat finish
- Manufactured from 3/16 cold rolled steel plate
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
SKU: S/B76740D -
Front Bumpers
Smittybilt XRC Front Bumper – 76806
- Manufactured from 3/16 cold roll steel
- 1.75″ 120 wall over rider and kickers
- Raised corners for better entry and exit under the most extreme conditions
- Solid Mount D-Rings – Welds on the inside and out
- Solid plate center section that wraps the frame horns and lower cross member
- Built in winch plate to accommodate up to 10k winch
- One-Piece welded design
- Two Stage Matte Black Finish Powder Coat Finish
- 5 year Limited Warranty
SKU: S/B76806 -
Front Bumpers
Smittybilt M1 RAM Truck Winch Mount Front Bumper with D-ring Mounts and Light Kit (Black) – 612802
Front BumpersSmittybilt M1 RAM Truck Winch Mount Front Bumper with D-ring Mounts and Light Kit (Black) – 612802
- Black powder coat
- M1 Truck Front Bumper
- Manufactured from 3/16 & 1/4 cold roll steel
- Ultra Bright Driving & Fog Lights
- Solid Mount D-Rings – Welds on the inside and out
- Solid plate center section that wraps the frame horns and lower crossmember
SKU: S/B612802 -
Front Bumpers
Fab Fours Vengeance Series Front Bumper (Black) – TT14-D2851-1
- 2 Stage Black Powder Coat
- Overall design and Lightweight: No Guard 65 lbs. / Pre-Runner Guard 75 lbs
- Center Mount allows for a Rigid Industries 20” LED light bar (light bar not included)
- Mounting options on each side for (2) 2×2 Dually lights to give you maximum LED light coverage (Lights not included)
- Lower cutout to provide maximum airflow
- Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
- 11 ga. U.S. Steel Construction
- 100% Made in the USA
SKU: FFITT14-D2851-1 -
Front Bumpers
Fab Fours Vengeance Front Bumper with Pre-runner Guard in Black Powdercoat (Black) – TT16-D3652-1
Front BumpersFab Fours Vengeance Front Bumper with Pre-runner Guard in Black Powdercoat (Black) – TT16-D3652-1
- 2016 Toyota Tacoma
- Overall design and fit is “High and Tight” to the contours of the vehicle
- Lightweight: No Gaurd 65 lbs. / Pre-Runner Guard 75 lbs
- Center Mount allows for a Rigid Industries 20” LED light bar (light bar not included)
- Mounting options on each side for (2) 2×2 Dually lights to give you maximum LED light coverage (Lights not included)
- Lower cutout to provide maximum airflow
- Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
- 2 Stage Black Powder Coat
- 11 ga. U.S. Steel Construction
- 100% Made in the USA
SKU: FFITT16-D3652-1 -
Front Bumpers
Poison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Black) – 17-63-010DBTP1
Front BumpersPoison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Black) – 17-63-010DBTP1
- 2 and 4-door models
- Black powder coat
- 3/16″ plate steel
- Mid-width high clearance bumper
- Skid plate shown is sold separately
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamps
- Integrated winch mount
- With shackle tabs
SKU: PSC17-63-010DBTP1 -
Front Bumpers
Fab Fours Grumper Winch Front Bumper (Black) – GR1000-1
- 2 and 4-door models
- Removable inserts for customization options
- Provides greater tire clearance
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring mounts that hold up to 7/8 shackle
- 2 Stage Matte Black Powder Coat
- 11-gauge steel construction
- 100% Made in the USA
SKU: FFIGR1000-1 -
Front Bumpers
- 17-Current Ford F-250/F-350
- 17 Ford F-450
- Black texture powder coat
- 11 gauge steel material
- 1 piece
- Winch ready – accepts most WARN mid-frame winches up to 12,000 pounds
- Accommodates oversize tires
- Easy to install
- Pre-drilled bolt holes and cutouts make it easy to mount a WARN winch
- Lights and winch sold separately
- 1 year limited warranty
SKU: WAR100918 -
Front Bumpers
Rugged Ridge Spartan Front Bumper with Standard Ends and Tube Override – 11548.02
- 07-Current Wrangler JK, 2 and 4 Door
- Standard bumper ends with Overrider tube
- Built from high-strength plate steel
- Textured black powder coat
- Incorporates a stand-alone winch plate
- Includes D-shackle mounts and tubular overrider
- Direct bolt-on installation
- Includes all necessary installation hardware
- Utilizes the factory JK fog lights for a finished look without any extra expense
- 5-year limited warranty
SKU: RUG11548.02 -
Front Bumpers
JcrOffroad Mauler Stubby Front Bumper without Tubework (Black) – JLFM-0-BARE
- 18-Current Wrangler JL, 2 and 4 Door
- Black powder coat finish
- Does not include tubework
- CNC cut and formed from 3/16″ steel
- Includes (2) 3/4″ thick shackle tabs
- Recessed winch mount
- Winch ready using the market standard 10″ x 4.5″ bottom foot mounting profile
- Compatible with the Warn Zeon and Warn Powerplant winches
- Built-in Hi-Lift Jacking points
- Easy bolt-on installation
- Includes mounting hardwareHand built-in the USA
SKU: JCRJLFM-0-PC -
Front Bumpers
Fab Fours Winch Front Bumper with No Guard (Black) – TT14-H2851-1
- Black powder coat
- Provides more tire clearance
- Winch ready (Accepts up to 12,000 lb. winches or smaller)
- 3/4″ D-ring mounts
- 1/4″ Boxed mounting system with adjustability to allow a custom Fab Fours’ signature injection molded light housings
- Fab Fours’ 90mm fog and 60mm turn indicator lights included FREE with the bumper!
- 2 Stage matte black powder coat or bare steel (-B instead of -1)
- 3/16″ Steel construction
- 100% Made in the USA
SKU: FFITT14-H2851-1 -
Front Bumpers
Fab Fours Black Steel Elite Adaptive Cruise Control Relocation Bracket (Black) – RGMOD-1
Front BumpersFab Fours Black Steel Elite Adaptive Cruise Control Relocation Bracket (Black) – RGMOD-1
- 2018 Ford F-150
- Relocates the Adaptive Cruise Control Module
- Works with Black Steel Elite Bumper
- Reuses the OE Plastic Cover
- 11 Gauge Steel
- Mounting options on each side for (2) 3″ X 3″ Cube lights to give you maximum LED light coverage (Lights not included)
- Matte Black PowderCoat
- 100% Made in the USA
SKU: FFIRGMOD-1 -
Front Bumpers
Fab Fours Full Metal Jacket Stubby Winch Front Bumper without Grill Guard (Black) – JK07-B1855-1
Front BumpersFab Fours Full Metal Jacket Stubby Winch Front Bumper without Grill Guard (Black) – JK07-B1855-1
- 2 and 4-door models
- 2 stage black powder coat
- Designed for maximum tire clearance
- Optional winch plate (JPWP-1) or optional Winch Modifier (JK07-B1859-1)
- Accepts up to 10,000 lb. winches or smaller
- Accepts the WARN Power plant and Zeon winches
- Light cut outs for factory fog lights
- Optional cutouts for 2×2 Rigid Industries Surface Mount Dually lights (Not included)
- 3/4″ D-ring mounts
- 2 Stage matte black powder coat or bare steel (-B instead of -1)
- 3/16″ Steel construction
- 100% Made in the USA
SKU: FFIJK07-B1855-1 -
Front Bumpers
Fab Fours Front Full Width Grumper (Black) – GR1010-1
- 2 and 4-door models
- 2 Stage Matte Black Powder Coat
- Removable inserts for customization options
- Provides greater tire clearence
- Integrated D-ring mounts that hold up to 7/8 shackle
- 11 gauge steel construction
- Weight 70lbs.
- 100% Made in the U.S.A.
SKU: FFIGR1010-1 -
Front Bumpers
Fab Fours Vengeance Series Pre-Runner Front Bumper (Black) – GM15-V3152-1
- Overall design and Light weight: No Guard 65 lbs. / Pre-Runner Guard 75 lbs
- Allows for an integrated 20″ LED light bar in the center (light bar not included)
- Mounting options on each side for (2) 2×2 Dually lights to give you maximum LED light coverage
- Lower cutout to provide airflow to intercoolers
- Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
- Sensors model not available for the 2015 Chevy HD
- 2 Stage Black Powder Coat
- 12 ga. U.S. Steel Construction
- 100% Made in the USA
SKU: FFIGM15-V3152-1 -
Front Bumpers
Fab Fours Premium Front Winch Bumper with Full Guard (Black) – FS17-A4150-1
- Black powder coat
- Provides far more tire clearence
- Winch Ready-Accepts up to 16,500 lb. winch
- 3/4″ thick D-Ring mounts holds up to 7/8″ shackle
- 2-Piece mounting system with adjustability to allow a “custom” fit
- Fab Fours’ signature injection molded light housings
- Fab Fours’ 90mm fog and 60mm turn inicator lights are included Free with the Bumper
- 2 Stage Black Powder Coat
- 3/16″ Steel Construction
- 230-270 lbs
- 100% Made in the USA
SKU: FFIFS17-A4150-1 -
-
Front Bumpers
Smittybilt M1 Ford Superduty Winch Mount Front Bumper with D-ring Mounts and Light Kit (Black) – 612830
Front BumpersSmittybilt M1 Ford Superduty Winch Mount Front Bumper with D-ring Mounts and Light Kit (Black) – 612830
- Black powder coat
- M1 Truck Front Bumper
- Manufactured from 3/16 & 1/4 cold roll steel
- Ultra Bright Driving & Fog Lights
- Solid Mount D-Rings – Welds on the inside and out
- Solid plate center section that wraps the frame horns and lower cross member
SKU: S/B612830 -