Tube fenders, inner fenders, and tubular flares for Jeeps and trail rigs that need extra tire clearance and trail protection. Poison Spyder Customs makes most of the parts here, alongside Smittybilt, Rugged Ridge, and Pro Comp. These aluminum and steel pieces replace or supplement stock fenders on lifted vehicles. See each product page for the vehicle and position, then compare the products below.
Tube Fenders
Showing 1–12 of 102 resultsSorted by popularity
-
Tube Fenders
Smittybilt XRC Armor Front Tube Fenders with 3″ Flare (Black) – 76867
- Front tube fender in black powder coat with a built-in 3 inch flare
- Fits the Jeep CJ7 from 1976 to 1986
- Tubular design for strength and durability
- Relocates the factory latch; stainless steel hardware included
- Modifies the front OE fender; cutting or drilling required
SKU: S/B76867 -
Tube Fenders
Smittybilt XRC Armor Front Tube Fenders (Black) – 76866
- Front tube fender in black powder coat for the Jeep CJ7
- Tubular design for strength and durability
- Relocates the factory latch for a finished look
- Stainless steel hardware included
- Modifies the front OE fender; cutting or drilling required
SKU: S/B76866 -
Tube Fenders
Rugged Ridge XHD Armor Fenders and Liner Kit – 11615.06
- Armor fenders for front and rear, fitted to 2007–2018 Jeep Wrangler JK Unlimited four-door models
- Heavy gauge 3 mm steel with fold-and-weld construction and black textured powder coat
- Includes marker light assemblies, hardware and installation instructions
- Patent pending; works with Rugged Ridge Spartan Grill and Rubicon Rock Rails
SKU: RUG11615.06 -
-
-
Tube Fenders
Fishbone Offroad Front Steel Tube Fenders – FB23194F
- Fishbone Offroad front steel tube fender, part number FISFB23194F
- Fits the 2018–2026 Jeep Wrangler (JL) and 2020–2026 Jeep Gladiator (JT)
- Textured black powder-coated steel
- Direct fit, no cutting or drilling required
- Included hardware and piece count not stated
SKU: FISFB23194F -
-
Tube Fenders
Fabtech Rear Steel Tube Fenders – FTS24213
- Rear steel tube fender for listed 2018 and 2021–2026 Jeep Wrangler (JL) models
- Part number FABFTS24213, 4.5 inches wide at the rear
- Black powder coat finish with 1.50 OD x .095 wall steel tubing
- Cutting or drilling required for installation
SKU: FABFTS24213 -
Tube Fenders
Fabtech Front Steel Tube Fenders – FTS24212
- Front steel tube fenders for listed 2018 and 2020–2026 Jeep JL and JT models
- Part number FABFTS24212, textured black powder coat finish
- Plug-and-play LED light kit included with the front fenders
- Cutting or drilling required for installation
SKU: FABFTS24212 -
Tube Fenders
Fab Fours Wrangler Inner Fender (Matte Black) – JL2002-1
- Front inner fender for the 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator JT
- Fab Fours part number FFIJL2002-1, matte black, sold as a pair
- Solid steel construction for protection
- Designed to work with the Jeep Grumper Fender (JL2006-1)
- Direct fit for many JL and Gladiator trims
SKU: FFIJL2002-1 -
Tube Fenders
Fab Fours Rear Inner Fenders (Black) – JL1008-1
- Rear inner fender for the 2018–2026 Jeep Wrangler JL
- Fab Fours part number FFIJL1008-1, black finish
- Complete bolt on system with optional tire clearance parts
- Made from 100% U.S. steel in South Carolina, USA
- Fits 2-door and 4-door JL models across many trims
SKU: FFIJL1008-1
Why use tube fenders
Stock plastic and sheet metal fenders are a weak point on a vehicle that goes off-road with larger tires. They crush against rocks, crack when brushed by trees, and limit the room for wheels to move at full flex. Tube and aluminum fenders replace them with narrower, stronger, or more open designs that offer better tire clearance and a better approach and departure profile. Many owners also like the weight savings of aluminum.
Types of fender parts
- Tube fenders: tubular frames that replace the whole fender and allow a wide opening around the tire.
- Inner fenders: aluminum panels that replace the factory inner fender, often with vents for engine bay airflow and a cleaner way to route wiring.
- Flares and armor: steel or aluminum flares that attach to the body edge with a wider, more rugged look.
- Front and rear sets: separately listed for the front corners and the rear quarter panels, sometimes specific to two-door or four-door models.
Materials and finishes
Aluminum is light and does not rust, though it can dent or tear on hard impacts and is sold bare or with a finish. Steel is stronger and cheaper to repair by welding, but heavier and requires paint or powder coat to prevent corrosion. Thicker plate, such as 3/16 inch steel, adds strength where the part may be hit. Bare metal needs sealing if the vehicle sees salt or coastal air, and anodized or powder-coated finishes last longer in harsh conditions.
What to check before buying
Vehicle fitment is the key detail. Listings often specify a Wrangler generation, number of doors, and whether the part is front or rear, left or right. Check whether the part pairs with other products from the same maker, such as a matching flare. Some kits install with bolts alone, while others need minor drilling or trimming of the factory fender and brackets, and a few need welding. Compare coverage, too, because narrower fenders may not satisfy the rules in your state for covering the tires on the road.
Installation and legal notes
Take your time with test fits and mark any cuts carefully. Seal exposed edges and check that the new fender doesn't interfere with the hood, lights, or steering at full lock. Lighting and turn signals may need relocation. Fender coverage rules vary by state, so check local regulations before using these on public roads. Always confirm fitment for your exact year, make, and model with the manufacturer's specifications.
Maintenance and compatibility
After each trail season, check welds, mounting bolts, and any slotted holes for cracks or loosening, especially near the corners that take the most hits. On bare aluminum, wash off salt and mud, and look for pitting at fasteners where dissimilar metals meet, since steel bolts in aluminum can corrode. Use stainless hardware or anti-seize compound where recommended. Think about the other parts of the vehicle, too. Larger tires, a winch bumper, and body armor can all change which fender style fits well. Keep wiring for turn signals and side markers away from sharp tube edges, and use grommets where cables pass through the panel to prevent chafing.
Popular Tube Fenders brands
- Poison Spyder Customs (71)
- Smittybilt (8)
- Fab Fours (5)
- Rugged Ridge (5)
- Addictive Desert Designs (3)
- Fabtech (3)
- DV8 Offroad (3)
- Fishbone Offroad (3)
- Pro Comp Suspension (2)
- Blue Torch Fabworks (1)
- Aries Offroad (1)
- GenRight (1)
Tube Fenders FAQ
What is the difference between tube fenders and fender flares?
Flares attach to the existing body panel and extend its edge. Tube fenders replace the fender itself with a stripped-down, tubular or aluminum design that opens up tire clearance and drops weight.
Are aluminum tube fenders better than steel?
They suit different needs. Aluminum is lighter and does not rust but can dent or tear. Steel is stronger and easier to weld but heavier and needs paint. Consider your terrain, budget, and corrosion exposure.
Do tube fenders require cutting or drilling?
Some kits bolt on with minimal drilling, and others need trimming of the factory fender or brackets. Check the product page notes and instructions to see what installation involves for your vehicle.
Are tube fenders street legal?
It depends on your state. Many places require bodywork to cover the tire tread on the road, and open tube designs may not meet that. Check local regulations and consider this before choosing a style.











