Overview
The Poison Spyder BFH II Rear Crossmember with 2 Inch Receiver in bare steel, part number 17-17-030, is a heavy-duty replacement for the stock crossmember on the JK Wrangler. It strengthens the Jeep JK Wrangler’s rear frame when trimmed for ground clearance and departure angle, and fits 2-door and 4-door models.
The crossmember is CNC laser-cut from high strength 3/16″ plate steel and precision brake-formed. Dimpled lightening holes remove weight and give a custom look if you run it by itself as a minimalist rear bumper. It also works with the BFH II Rear Bumpers, which fit over it.
The title and short description give it an integrated hitch receiver; some of the accompanying text refers to a non-receiver version, so confirm which version you have.
The minimalist BFH II approach keeps the Jeep JK frame strength intact while providing the ground and obstacle clearance and departure angle it is designed for. The BFH II Rear Bumper fits closely over the crossmember.
Key features
- Heavy-duty replacement for the stock crossmember
- 3/16″ CNC laser-cut plate steel
- Works with BFH II Rear Bumpers
- Can be used alone as a minimalist bumper
- Integrated hitch receiver (2 inch)
- Dimpled lightening holes
- Laser-cut steel template for frame cuts
Choosing a rear crossmember setup
A rear crossmember does more than hold a bumper. On a Wrangler it ties the rear frame rails together, carries the hitch mount and gives the bumper something solid to bolt to. When a crossmember is cut away and replaced, the frame loses some of its original bracing, so the new part has to carry those loads through the rails it is welded to. Clean, complete welds matter more here than anything else in the job.
Anyone choosing between a minimalist setup and a full bumper should think about how the crossmember will be used. Running it alone gives a low, open rear end that suits rock crawling and trail use, while adding a BFH II bumper later adds protection and a larger mounting surface. Plan the wiring for any rear lights or a spare tire carrier before the crossmember is welded in, since access gets harder afterward.
- Check frame rail condition before cutting
- Plan rear lighting and wiring first
- Confirm bumper compatibility before buying
- Budget for paint or powder coat after welding
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-17-030 |
| UPC | 614901750799 |
| Part type | Rear crossmember |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Hitch receiver | Integrated, 2 inch |
| Body styles | 2-door and 4-door |
| Installation | Requires cutting stock frame rails and welding |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in 2-door and 4-door body styles. Match the year, model and trim to your vehicle before buying.
Other Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires trimming the bulky rear frame rails and stock bumper mounts and welding in the new crossmember. A laser-cut steel template assists with the cuts, and the instructions should be read before starting.
The part is bare steel and needs painting after installation.
What’s included
Not included: a bumper, which is a separate part.









