Poison Spyder Customs
Showing 337–379 of 379 resultsSorted by popularity
-
-
Tube Fenders
Poison Spyder Front Steel Crusher Flares – Narrow Width (Bare Steel) – 17-03-031
- Narrow width steel front crusher flares for Jeep JK Wrangler, 2-door and 4-door models
- 2 inches narrower than standard width flares, for extra clearance on tight trails
- 1.5 inch x .120 wall DOM rub rail on a 3/16-inch thick mounting plate
- Sold as a pair, bare steel, no cutting or drilling required
SKU: PSC17-03-031 -
-
Front Bumpers
Poison Spyder Customs Bruiser MID Front Bumper (Black) – 17-55-010DBTP1
- Bruiser MID front bumper for the 2007-current Jeep Wrangler JK, 2-door and 4-door
- Mid-width, multi-faceted design with a recessed winch mount
- SpyderShell Armor Coat semi-gloss black; recessed mounts for LED cube lights
- Poison Spyder part 17-55-010DBTP1
SKU: PSC17-55-010DBTP1 -
Side Marker Light Assembly
Poison Spyder 3/4 Inch LED Marker/Turn Signal Lamp – 41-04-085
- 3/4 in LED marker and turn signal lamp, amber
- Three-wire assembly for use as both turn signal and marker
- DOT-approved, with pigtail harness and mounting grommet
- Sold each; a pair needs two
- Part 41-04-085, UPC 614901728002
SKU: PSC41-04-085 -
Tube Fenders
Poison Spyder Rear Crusher Flares – Extra Wide (Bare Steel) – 17-05-020
- Extra wide steel rear crusher flares for Jeep JK Wrangler, 2-door and 4-door models
- 2 inches wider than standard width rear flares, for extra tire coverage
- 1.5 inch OD, .120 wall DOM outer rub rail on a 3/16-inch steel mounting plate
- Internal bracing kit; ships bare steel, cutting or drilling required
SKU: PSC17-05-020 -
Front Bumpers
Poison Spyder BFH II Front Bumper with Brawler Bar in Black – PSC17-16-021-DBP1
- BFH II front bumper with Brawler Bar in black for the Jeep Wrangler JK, PSC17-16-021-DBP1
- Lightweight stubby design with SpyderShell semi-gloss black finish and a 5-year warranty on materials and workmanship
- Recessed light buckets take OE fog lamps or Rigid Dually lights with an adapter plate
- Requires cutting the frame
SKU: PSC17-16-021-DBP1 -
Tube Fenders
Poison Spyder Crusher Flare Inner Fenders (Aluminum) – 17-02-080
- Aluminum front inner fenders for the 2007-2017 Jeep Wrangler JK
- Replace the stock plastic front inner fender liners
- Single-piece, bead-rolled aluminum with minor drilling
- Designed to pair with Poison Spyder Crusher Flares
SKU: PSC17-02-080 -
Skid Plates
Poison Spyder Brawler Lite Skid (Bare Steel) – 17-59-030
- Optional front skid for the JK Brawler Lite bumper
- Fits 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- CNC laser-cut 3/16-inch plate steel; no cutting or drilling
- Protects the Rubicon JK swaybar disconnect motor; part number 17-59-030
SKU: PSC17-59-030 -
Front Bumpers
Poison Spyder BFH Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-16-020-DB
- Poison Spyder BFH front bumper with Brawler Bar and shackle tabs, bare steel, 14-16-020-DB
- One piece of 3/16″ plate steel, no wider than the frame rails
- Brawler Bar extends 7.4″ forward and is 9.8″ high
- Shackle tabs from 1″ thick plate steel
SKU: PSC14-16-020-DB -
-
Hood Vent
Poison Spyder Hood Louver – 13-53-010
- Bare aluminum Poison Spyder hood louver, part number 13-53-010
- Direct fit Jeep hood vent, no model years named
- CNC laser-cut and die-stamped aluminum
- Template and installation instructions included
- Drilling and cutting of the hood required
SKU: PSC13-53-010 -
-
Light Mounting Brackets & Cradles
Poison Spyder A-Pillar 50 Inch Light Bar Mount (Bare) – 45-28-R50
- Bare steel A-pillar light bar mount for a 50-inch Rigid Industries light bar on the Jeep JK Wrangler
- CNC laser cut from 3/16-inch plate, brake-formed and finish welded
- Attaches to the A-pillar; uses the existing lower windshield bracket bolts
- Rubber liners included; 2-door and 4-door models; UPC 614901728682
SKU: PSC45-28-R50 -
-
-
Hood Vent
Poison Spyder Hood Louver – 14-53-010-PC
- Black powder coated Poison Spyder hood louver, part number 14-53-010-PC
- Direct fit Jeep hood vent, no model years named
- Vents the upper engine bay to reduce under-hood heat
- Full-size template, stainless fasteners and one washer nozzle port
- Drilling and cutting of the hood required
SKU: PSC14-53-010-PC -
Front Bumpers
Poison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-59-010-DB
Front BumpersPoison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-59-010-DB
- Poison Spyder RockBrawler mid-width front bumper with Brawler Bar and shackle tabs, 14-59-010-DB
- Bare 3/16″ plate steel, CNC laser-cut and brake-formed
- Any winch with a 10″ X 4.5″ mounting pattern bolts on; fairlead mount sold separately
- Recovery shackle tabs from 1″ thick steel billet for 3/4″ shackles
SKU: PSC14-59-010-DB -
Body Corner Guard
Poison Spyder Trail Corner (Black) – 14-06-010-PC
- Black Trail Corner body guard in 3/16 inch steel
- Protects a body corner that is exposed to rock damage
- Pre-cut gas filler, taillight and license plate holes
- Works with OEM taillights; stainless steel button head hardware included
SKU: PSC14-06-010-PC -
Front Bumpers
Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs (Bare) – 17-64-020-D
- Brawler Full Width front bumper with shackle tabs for the Jeep Wrangler JK, 2-door and 4-door
- Full-width multi-faceted design protects the lower grille and reaches the outer edge of stock flares
- Recessed light buckets take OE fog lamps or Rigid Dually lights with an adapter plate
- 3/16″ plate steel in bare steel; Poison Spyder part 17-64-020-D
SKU: PSC17-64-020-D -
Tube Fenders
Poison Spyder Front Crusher Flares – Extra Wide (Bare Steel) – 17-03-032
- Extra wide steel front crusher flares for Jeep JK Wrangler, 2-door and 4-door models
- 2-1/4 inches wider than standard width front flares; ships bare steel
- 1.5 inch OD x .120 wall DOM outer rub rail on a 3/16-inch steel mounting plate
- Inner brace set, rubber liners and a mounting provision for a 3/4-inch LED marker
SKU: PSC17-03-032 -
-
Rear Bumpers
Poison Spyder RockBrawler Rear Bumper with Shackle Tabs (Bare) – 14-61-010-D
- RockBrawler rear bumper 14-61-010-D with shackle tabs
- Bare 3/16″ plate steel with built-in high clearance receiver
- Universal mounting for TJ/LJ, YJ and CJ
- Receiver is a recovery point, not rated for towing
SKU: PSC14-61-010-D -
Tube Fenders
Poison Spyder DeFender XC High-Line Negative Fenders (Bare Steel) – 14-02-090
- Bare steel negative flare fender made from 3/16 inch steel plate
- Tapers inward to hug the hood, with no tire coverage
- Requires cutting the hood, with a mounting spot for a 3/4 inch LED marker
- Stands 3 inches higher than standard fenders
- Brand Poison Spyder Customs, part number 14-02-090
SKU: PSC14-02-090 -
Tube Fenders
Poison Spyder Front Aluminum Crusher Flares – Standard Width (Bare Aluminum) – 17-03-030-ALUM
Tube FendersPoison Spyder Front Aluminum Crusher Flares – Standard Width (Bare Aluminum) – 17-03-030-ALUM
- Aluminum front crusher flares for Jeep JK, standard width, sold as a pair
- 1.5 inch x .188 wall annealed aluminum rub rail with 3/16-inch mounting plate
- Includes an inner brace set that ties the flare to the inner tub
- Countersunk holes for flat-head stainless steel hardware; UPC 614901739084
SKU: PSC17-03-030-ALUM -
-
-
Tube Fenders
Poison Spyder Rear Aluminum Crusher Flares (Aluminum) – 17-05-010-ALUM
- Aluminum rear crusher flares for the Jeep JK, sold as a pair
- Weighs 9.6 lbs per fender; tire coverage up to a 40 inch tire
- 1.5 inch x .199 wall annealed aluminum rails and 3/16-inch mounting plate
- Includes a 4-piece inner brace kit; drilling and nut-serts required
SKU: PSC17-05-010-ALUM -
Hood Vent
Poison Spyder Hood Louver – 14-53-010
- Bare aluminum Poison Spyder hood louver, part number 14-53-010
- Fitment: sold as a direct fit Jeep hood vent, no model years named
- CNC laser-cut and die-stamped, with one washer nozzle port
- Full-size template and stainless steel fasteners included
- Drilling and cutting of the hood required
SKU: PSC14-53-010 -
Tube Fenders
Poison Spyder DeFender XC High-Line Front Fenders (Bare Steel) – 14-02-093
- DeFender XC high-line front fenders in bare steel for big tires with minimal lift
- 3-inch tapered flare, 3/16-inch steel plate
- Offers 3 inches of extra height in the wheel opening over standard DeFenders
- Requires modifying the hood and fitting XC inner fenders; UPC 614901724929
SKU: PSC14-02-093 -
Front Bumpers
Poison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Black) – 17-63-010DBTP1
Front BumpersPoison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Black) – 17-63-010DBTP1
- Mid-width front bumper for the Jeep Wrangler (JK), 2 and 4-door
- 3/16 inch plate steel with black powder coat
- Integrated winch mount and shackle tabs
- Recessed buckets for the factory fog lamps
SKU: PSC17-63-010DBTP1 -
Fender Liner
Rear Inner Fender Kit – Spydershell Coat Black
- Rear inner fenders for the Jeep Wrangler JK, 2007 to 2018
- 16 gauge 5052 aluminum, CNC laser cut and brake formed
- Bead rolled for rigidity; finished in Spydershell black
- May be left bare or painted; stainless steel hardware
SKU: PSC17-05-080P1







































