Overview
The Poison Spyder 18-56-020 is a 3/16-inch steel extreme duty trans-mount cross member for the Jeep Wrangler JK, with either automatic or manual transmission. It is for 2007-2011 JK models, in both 2-door and 4-door bodies.
The factory cross member uses 1/8-inch sheet metal on top and 14-gauge metal on the bottom, a thin build that can crumple. This cross member’s top plate is 33% thicker and its bottom plate is twice as thick.
Because the external dimensions and bolt locations match the factory unit, the mounting stays the same, and aftermarket skid systems that attached to the stock cross member should still attach to this one. The corners are brake-formed with no welds on the box corners, which helps the plate resist dents and bends. The heavier bottom plate is built for the rock strikes that can crumple the thin factory piece.
Key features
- 3/16-inch steel top and bottom plates
- Brake-formed corners with no welds on the box corners
- Four welded-in DOM tubing spacers
- Matches factory external dimensions and bolt locations
- Works with automatic and manual transmissions
- 2-door and 4-door models
Skid plates and trail protection
The transmission cross member carries the transmission and a skid plate mount, so it sees more load than most underbody parts. When the factory unit is thin, a rock strike can bend it toward the transmission pan or crush the mount. A heavier plate spreads that impact across more metal, which is why a cross member like this suits trail use.
When you install a replacement, check that the skid plate bolts, the transmission mount and the crossmember bolts are all tight. Look for cracked welds at the spacers and corners after rough trails, and check the paint for chips that could start rust. If a skid system is already on the truck, inspect its mounting points at the same time.
- Inspect corner welds after rough trail use
- Re-torque mounts after the first few drives
- Touch up bare steel before it sees mud
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 18-56-020 |
| UPC | 614901727746 |
| Material | 3/16-inch steel plate |
| Top plate | 33% thicker than the factory plate |
| Bottom plate | Twice as thick as the factory plate |
| Factory cross member | 1/8-inch top, 14-gauge bottom |
| Spacers | Four DOM tubing |
| Finish | Bare steel |
| Fitment | Direct fit, transmission skid plate brackets |
| Installation | No cutting or drilling required |
Vehicle fitment
Fitment covers 2007-2011 Jeep Wrangler JK models in both 2-door and 4-door bodies, with automatic or manual transmission.
This part number does not cover 2012–2015 JK models or the JL generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cross member matches factory mounting, so factory skid plates and aftermarket skid systems that attached to the factory unit should attach to it. Because it is bare steel, finish it before installation.
What’s included
One extreme duty trans-mount cross member, supplied as bare steel for painting or powder coating.












