Overview
The Poison Spyder Dana 30 Bombshell differential cover (part number 42-11-030-PC) is a front cover for the Dana 30 standard axle. It is cast from ductile nodular iron and is designed to protect the gears, locker and cover bolts from rocks and trail hazards.
Stock differential covers on Jeeps are thin stamped sheet metal that can be caved in by a rock. The Bombshell is cast to resist that, and it measures 7/16 inch to 1/2 inch thick at the outer surface.
A thin stamped cover can be pushed in against the ring gear by one hard rock strike, which can damage the gears, locker and carrier bearings. A peeled lip can also let gear oil drain out on the trail.
The Bombshell’s recesses keep the bolt heads clear of rocks, and its ramp shape helps the vehicle slide up and over obstacles. The cover is thickest around the bolt ring, where rock contact is most likely.
Key features
- Cast ductile nodular iron
- Recesses that protect the cover bolt heads
- Ramp profile to help the vehicle slide over obstacles
- Up to 1 inch thick around the bolt ring, where rock contact is most likely
Axle protection on the trail
A differential cover is a thin wall between the gears and the rocks, so its condition matters more on the trail than on pavement. Dented or cracked covers can crowd the ring gear, and a seal pushed out of shape can let oil escape. Regular checks help catch these problems before they turn into a failed axle.
Cover service usually comes with fresh gear oil and a new gasket. Use a gasket that matches the housing face and clean both surfaces thoroughly before reassembly. Re-torque the cover bolts after the first few drives, since a new gasket can settle.
A cast cover adds weight to the front axle, so consider how it affects steering and approach angle. Paired with skid plates or a locker, the cover is one part of a larger underbody setup, and the parts should be chosen together so they clear each other.
- Inspect for dents and cracked edges
- Check for oil seepage at the gasket
- Re-torque cover bolts after first drives
- Look for rubbing on tires and brackets
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 42-11-030-PC |
| Axle type | Dana 30 standard |
| Axle location | Front |
| Material | Cast ductile nodular iron with a powder coated finish. |
| Oil capacity | Extra capacity |
| Finish | Powder coated |
| Thickness | 7/16 inch to 1/2 inch at the outer surface |
Vehicle fitment
It is sized for the Dana 30 standard front axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cover is sized to the Dana 30 standard front axle. Confirm the axle type before fitting, since the bolt recesses and the ramp profile are designed around that housing.






















