Rear bumpers replace the factory bumper with heavier steel or aluminum construction, often adding a receiver hitch, shackle mounts, tire carrier provisions or a skid plate. This page covers plate steel and tube designs from Fab Fours, Smittybilt, Poison Spyder Customs, Ranch Hand and N-Fab for Jeeps, trucks and SUVs. Open a product page to see fitment notes and part numbers, then compare the products below.
Rear Bumpers
Showing 1–12 of 340 resultsSorted by popularity
-
-
Bumpers
Smittybilt Stryker Rear Bumper – 77732
- Fits 2018–2026 Jeep Wrangler JL 2-door and Unlimited 4-door models
- Rear bumper that matches the modular Stryker front bumper
- Receiver hitch and 7/8 inch D-ring mounts included
- Stubby design press-formed from 3mm cold rolled steel
- Part number S/B77732
SKU: S/B77732 -
Bumpers
Smittybilt Stryker Modular Rear Bumper – 76732
- Fits 2007–2018 Jeep Wrangler JK 2-door and Unlimited 4-door models
- Stubby modular rear bumper press-formed from 3mm cold rolled steel
- Integrated lift points and 7/8 inch D-ring mounts
- Optional Stryker Side Wings sold separately for side protection
- Part number S/B76732
SKU: S/B76732 -
-
-
-
Bumpers
Smittybilt Classic Rock Crawler Rear Bumper and Tire Carrier with Receiver Hitch and D-ring Mounts (Black) – 76651D
BumpersSmittybilt Classic Rock Crawler Rear Bumper and Tire Carrier with Receiver Hitch and D-ring Mounts (Black) – 76651D
- Fits 1987–1995 Jeep Wrangler YJ, 1997–2006 TJ and 2004–2006 LJ
- Rear bumper with receiver hitch, D-ring mounts and a tire carrier
- Carrier holds tires up to 35 inch
- Zinc under-coat and dual-stage powder coat in textured black
- Part number S/B76651D
SKU: S/B76651D -
Bumpers
Smittybilt Apollo Rear Bumper – 77784
- Fits 2018–2026 Jeep Wrangler JL and 2020–2021 Gladiator models
- Powder coat steel rear bumper with D-ring mounts
- Compatible with the factory tire carrier or the Smittybilt HD Pivot 7743
- No receiver hitch and no tire carrier included
- Part number S/B77784
SKU: S/B77784 -
Bumpers
Smittybilt 3″ Rear Double Tube Bumper without Hitch (Stainless Steel) – JB48-RS
- Fits 2007–2018 Jeep Wrangler JK 2-door and Unlimited 4-door models
- Stainless steel, one-piece tubular rear bumper
- Robotically welded with pre-cut vertical uprights
- No receiver hitch and no D-ring mounts included
- Part number S/BJB48-RS
SKU: S/BJB48-RS -
Bumpers
Rugged Ridge Dual Tube Rear Bumper without Hitch (Stainless Steel) – 11573.03
- Fits 1987–1995 Jeep Wrangler YJ, 1997–2006 TJ and 2004–2006 LJ models
- Stainless steel dual tube rear bumper with welded end caps
- 17-inch rear opening for tires up to 31 inch on the factory spare mount
- Optional frame-mounted receiver hitch available
- Part number RUG11573.03
SKU: RUG11573.03 -
Bumpers
Rough Country Heavy Duty Rear LED Bumper (Black) – 10784
- Fits 1999–2016 Ford F-250 and F-350 Super Duty trucks
- All-steel rear LED bumper with two pre-installed 2-inch LED cubes
- Two integrated steps for bed access
- Keeps the factory receiver hitch; sensor relocators included
- Part number R/C10784
SKU: R/C10784 -
Bumpers
Rough Country Heavy Duty Rear LED Bumper (Black) – 10773
- Fits 2007–2018 Chevrolet Silverado 1500 trucks
- All-steel rear LED bumper with two 2-inch flush-mount LED cubes
- Two integrated steps for bed access
- Keeps the factory receiver hitch; sensor relocators included
- Part number R/C10773
SKU: R/C10773
What a rear bumper adds
A stock rear bumper is mostly cosmetic and impact cover. An aftermarket bumper adds a stronger structure and usually useful hardware: recovery shackle tabs, a receiver for towing, a mount for lights or a spare tire carrier, and better clearance at the back corners. Trimmed corners improve the departure angle on steep exits, which matters on trail rigs and lifted trucks.
Materials and construction
- Plate steel: strong and common on Jeep bumpers. It is heavy, so allow for added weight on the rear suspension.
- Tubular or pipe-and-tread-plate designs: a classic truck look, with a step surface in some styles.
- Aluminum: much lighter, with lower corrosion risk. It is not as strong as steel at the same thickness, so check the wall thickness in the product listing.
Finishes include black powder coat and bare steel. Bare steel needs a coat of paint before use, and any finish will chip on the trail and benefit from touch-ups.
Features to compare
- Hitch receiver: check the size and the towing rating of the receiver and whether the bumper is rated for towing at all.
- Shackle mounts: look for thick tabs sized for the shackles you plan to use. Never use a tow hook or tab as a lifting point.
- Sensor cutouts: newer trucks with parking sensors may need a bumper made to accept them, as some listings state.
- Tire carrier: some Jeep bumpers-bumpers-tire-carriers-winch-mounts-2 include or accept a swing-out carrier. A mounted tire adds a lot of load, so check the rated capacity.
- License plate and lighting: many bumpers-bumpers-tire-carriers-winch-mounts-2 include plate and light provisions. Lighting and plate rules vary by state, so check local regulations.
Fitment
Rear bumpers-bumpers-tire-carriers-winch-mounts-2 are model specific. The listing may specify a vehicle generation, such as a range of Wrangler years or a particular Ford truck generation, and may be limited by whether the bumper has a tire carrier mount. Confirm fitment for your exact year, make and model, and check the manufacturer's specifications for weight and hardware.
Installation notes
Expect to remove the factory bumper and sometimes the hitch, wiring and sensors. Rear bumpers-bumpers-tire-carriers-winch-mounts-2 can weigh well over 50 pounds, so use a jack or a helper to hold the part. Tighten bolts to the specified torque, and have a shop install it if you are not comfortable working under the vehicle. Recheck the bolts after the first drive and after rough trail use.
Choosing for your use and avoiding mistakes
A daily-driven truck, a weekend trail Jeep and a heavy overland rig each ask different things of a rear bumper. If the vehicle tows regularly, weigh the receiver rating and tongue clearance first. If it climbs rocks, the shape of the corners and the height of the lower edge matter more than looks.
- Account for the weight. A bumper plus a tire carrier, jerry can mounts and lights can add a large load behind the axle. Consider heavier rear springs or shocks if the rear sits low afterward.
- Check clearance for the spare and the tailgate. A swing-out carrier needs room to open, and some tailgates will not clear a hitch receiver when open.
- Plan the wiring. If your vehicle has a tow connector, backup sensors or a third brake light, verify how those will be routed or relocated.
- Inspect the welds and the hardware. After trail use, look for cracked welds, stretched bolt holes and loose fasteners, and keep the exposed steel coated.
Popular Rear Bumpers brands
- Fab Fours (79)
- Smittybilt (51)
- Addictive Desert Designs (28)
- Poison Spyder Customs (26)
- Ranch Hand (21)
- Nfab (17)
- Rampage (15)
- ARB 4x4 Accessories (14)
- Body Armor 4x4 (12)
- Warn (11)
- Westin (11)
- Bestop (9)
Rear Bumpers FAQ
Do aftermarket rear bumpers include a hitch?
Many include a receiver or accept a hitch, but not all do. Check the listing for receiver size and the towing rating. Some designs are intended only for trail protection and recovery points.
Will a heavy rear bumper affect my suspension?
Steel bumpers add weight behind the axle, which can cause the rear to sit lower, especially with a tire carrier. Springs or shocks with higher ratings may be needed, so check the weight in the listing.
Are steel or aluminum bumpers better?
Neither is better in every case. Steel is stronger for the money and heavier, while aluminum is much lighter and resists rust but can cost more. Choose based on weight tolerance and intended use.
Can I use the shackle mounts for recovery?
Shackle tabs are made for recovery, but follow the rated capacity of the shackle and the bumper and use soft, correctly rated gear. Never exceed ratings or use them as a lifting point.










