Overview
The Poison Spyder Rear Stinger with Base Plate and Tabs in bare steel, part number 14-13-020, is a fold-down spare tire carrier made from 3/16-inch steel plate and 1-3/4-inch x .120 wall DOM tubing. It holds up to a 40-inch tire.
Pulling the two upper pins lets the carrier swing down, so a large tire can be rolled into it. Secure the tire with the included 3-Way Spare Tire Strap, then swing the carrier back up and pin it. The carrier gives a measure of rear-flop protection, light weight and high clearance, and the base plate and tabs are included.
It is designed to be installed with Poison Spyder Crusher Corners with LED taillights and does not fit stock taillight housings. Confirm the fit for your vehicle before ordering.
Key features
- Fold-down carrier swings down for loading big tires
- 3/16″ steel plate and 1-3/4″ x .120 wall DOM tubing
- 3-way spare tire strap provided
- Includes base plate and tabs
- Holds up to a 40″ tire
- Bare steel
Loading a large spare
A carrier that swings down makes a heavy tire easier to load, but the weight still has to be handled with care. Lift the tire with a helper or a lifting aid, and keep fingers clear of the pivot and pins while the carrier moves. Check that the carrier is fully pinned before driving.
Tires mounted on a rear carrier add weight far from the axle and can change how the vehicle handles on rough ground. Check the strap and the tire seat after the first drives, since road bumps can shift the load. Inspect the welds and mounting tabs for cracks after hard trail use.
- Use a helper for heavy tires
- Re-check the strap after the first drives
- Confirm pins are fully seated before driving
- Inspect welds and tabs after trail use
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-13-020 |
| UPC | 614901725681 |
| Part type | Spare tire carrier |
| Material | 3/16″ steel plate and 1-3/4″ x .120 wall DOM tubing |
| Finish | Bare steel |
| Maximum tire size | 40″ |
| Strap | 3-way spare tire strap |
| Base plate and tabs | Included |
| Intended with | Poison Spyder Crusher Corners with LED taillights |
Vehicle fitment
It is intended for 2012 to 2015 models. Confirm fit for your vehicle’s year, model and trim before ordering. The intended pairing is with Poison Spyder Crusher Corners.
It is not compatible with stock taillight housings. Other manufacturers’ corner protectors may fit if they are 3/16″ thick, but you would likely need to drill new holes in the corners. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Poison Spyder does not recommend installing the Rear Stinger without Crusher Corners. If you use other corners they must be 3/16″ thick, and their bolt holes may not line up, so new holes are likely.
What’s included
- Rear Stinger tire carrier
- Base plate and tabs
- 3-Way Spare Tire Strap
Not included: Crusher Corners with LED taillights.









