Poison Spyder Customs
Showing 241–288 of 379 resultsSorted by popularity
-
Light Mounting Brackets & Cradles
Poison Spyder A-Pillar 50 Inch Light Bar Mount (Bare) – 45-28-R50-ALUM
Light Mounting Brackets & CradlesPoison Spyder A-Pillar 50 Inch Light Bar Mount (Bare) – 45-28-R50-ALUM
- Aluminum A-pillar light bar mount for a 50-inch Rigid light bar on the Jeep JK Wrangler
- Light-weight aluminum with 3/16-inch thick plate, brake-formed and finish welded
- Attaches to the A-pillar with the existing lower windshield bracket bolts
- Rubber liners included; 2-door and 4-door models; UPC 614901728699
SKU: PSC45-28-R50-ALUM -
-
-
Side Marker Light Assembly
Poison Spyder 3/4 Inch LED Marker/Turn Signal Lamp (Red) – 41-04-070
- Red 3/4-inch LED marker and turn signal lamp from Poison Spyder Customs, part number 41-04-070
- Three-wire design runs as a turn signal and marker light together, or as either one alone
- DOT-approved LED lamp, supplied with a pigtail harness and mounting grommet
- Universal fit; sold individually, with a quantity of two for a pair
SKU: PSC41-04-070 -
Decals
Poison Spyder Spyder Logo Hood Decal in Black (Black) – 51-46-011-B
- Large black Spyder logo hood decal, about 28 by 18 inches
- Die-cut from premium exterior grade vinyl
- Fits the hood of Jeep CJ and Wrangler models
- Also offered in other colors, including a digitally printed Knife Blade design
SKU: PSC51-46-011-B -
-
Side Marker Light Assembly
Poison Spyder Rectangular LED Marker/Turn Signal Lamp (Amber) – 41-04-203
Side Marker Light AssemblyPoison Spyder Rectangular LED Marker/Turn Signal Lamp (Amber) – 41-04-203
- Rectangular LED marker and turn signal lamp in amber
- Three-wire lamp that can run as a marker and a turn signal
- Useful when factory signals were removed for armored fenders such as DeFenders
- Sold individually
SKU: PSC41-04-203 -
-
Tube Fenders
Poison Spyder Standard Crusher Corners (Bare Steel) – 11-04-020
- Standard Crusher Corners in bare 3/16 inch plate steel, built for the CJ-7
- Larger TJ-style wheel opening and factory fuel filler opening
- Provisions for flush-mounted LED taillights, sold separately
- No mounting holes for OE flares or the license plate holder
SKU: PSC11-04-020 -
Fender Liner
Poison Spyder Vented Front Inner Fender Kit (Aluminum) – 17-02-080-V
- Poison Spyder vented front inner fender kit for the Jeep JK
- Bare aluminum, CNC laser-cut sheet, four-piece bolt-together assembly
- Part number 17-02-080-V, UPC 614901750744
- Fits 2-door and 4-door models
- Cutting or drilling required for installation
SKU: PSC17-02-080-V -
Decals
Poison Spyder Spyder Rubicon Hood Decal in Silver (Silver) – 51-46-016-S
- Silver Rubicon-style hood decal with the Spyder logo in place of the O
- 1.4 inches tall; measure the hood to confirm the length before ordering
- Sold individually; order two for both sides of the hood
- Made for JK or TJ Rubicon hoods
SKU: PSC51-46-016-S -
-
-
Tube Fenders
Poison Spyder DeFenders Solid Inner Fender Kit (Aluminum) – 13-02-080
- Solid aluminum inner fender kit that installs with Poison Spyder DeFender front fenders
- Three-piece bolt-together assembly cut with CNC lasers from aluminum sheet
- Gives engine bay splash protection and a place to mount under-hood accessories
- Bolt-in option for Jeeps without stock inner fenders; UPC 614901733150
SKU: PSC13-02-080 -
Shock Mounts
Poison Spyder Upper Coil Over Mounts – 14-51-010
- Front upper coilover mounts in bare steel for builder projects, designed for Daddy Longlegs
- Made from 3/16-inch plate steel for shocks with a 2-inch diameter body
- Designed for full-width axles; upper tabs hold the shock bolt in double shear
- Builder component with no installation instructions; welding required; UPC 614901736328
SKU: PSC14-51-010 -
-
Light Mounting Brackets & Cradles
Poison Spyder A-Pillar 50 Inch Light Bar Mount (Bare) – 45-28-R54
- Bare steel A-pillar light bar mount for a 50-inch Rigid light bar on the Jeep TJ Wrangler
- 3/16-inch plate, brake-formed and finish welded with a contoured, gusseted design
- Attaches to the A-pillar with the existing lower windshield bracket bolts
- Rubber liners included; UPC 614901728705
SKU: PSC45-28-R54 -
Tube Fenders
Poison Spyder Crusher Corners (Bare Steel) – 18-05-021
- Poison Spyder Crusher Corners for the Jeep Wrangler JK (rear corner armor), part 18-05-021
- Bare steel, made of 1/8″ steel; full-corner coverage
- Cut to accept 4″ round LED taillights and 2-1/2″ round LED back-up lights (sold separately)
- Stainless steel hardware and install instructions included
SKU: PSC18-05-021 -
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 14-16-020-DS
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 14-16-020-DS
- Poison Spyder BFH front bumper with shackle tabs and Trail Stinger, part 14-16-020-DS
- 3/16-inch bare plate steel, integrated winch mount
- Stinger extends 13.4 inches and stands 17 inches high
- 1-inch thick shackle tabs for 3/4-inch shackles
SKU: PSC14-16-020-DS -
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 11-16-020-DS
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 11-16-020-DS
- Poison Spyder BFH front bumper with shackle tabs and Trail Stinger, part 11-16-020-DS
- CNC laser-cut 3/16-inch bare plate steel, integrated winch mount
- Trail Stinger 13.4 inches long and 17 inches high
- Shackle tabs from 1-inch plate steel for 3/4-inch shackles
SKU: PSC11-16-020-DS -
Tube Fenders
Poison Spyder Stock Crusher Corners (Bare Aluminum) – 15-04-010-ALUM
- Bare aluminum Stock Crusher Corners, 3/16 inch thick 6061-T6
- Stainless steel hardware; CNC laser-cut and formed
- Keeps factory wheel, fuel filler and equipment openings
- Cutting or drilling required; no vehicle list provided
SKU: PSC15-04-010-ALUM -
Tailgate Covers and Storage
Poison Spyder Tramp Stamp II with License Plate Mount (Black Powder Coat Steel) – 18-04-012
Tailgate Covers and StoragePoison Spyder Tramp Stamp II with License Plate Mount (Black Powder Coat Steel) – 18-04-012
- Fits the 2007–2018 Jeep Wrangler JK, 2-door and 4-door, with a wide-vent tailgate
- Moves the license plate to the center of the tailgate
- 1/8-inch aluminum plate with a textured black powder coat
- Bolts on using the OE spare tire mount bolts; part number 18-04-012
- Tall-vent tailgates are not a direct fit
SKU: PSC18-04-012 -
License Plate Frames and Covers
Poison Spyder LED License Plate and 3rd Brake Light Connectors – 41-06-040
License Plate Frames and CoversPoison Spyder LED License Plate and 3rd Brake Light Connectors – 41-06-040
- Poison Spyder LED license plate and third brake light connector, part number 41-06-040
- Written for the JK LED taillight harness, passenger side
- Mounts to the two upper license plate bolts
- Weatherproof wiring connection, light included
- Steel, no drilling required
SKU: PSC41-06-040 -
-
Light Mounting Brackets & Cradles
Poison Spyder Lower A-Pillar Light Mount Set – 45-28-RDA2
- Pair of lower A-pillar light mounts for the Jeep TJ, black powder coat
- Designed for Rigid Industries Dually or Dually D2 LED lights
- Fits other compact off-road lights with a 7/16 inch mounting hole
- Rubber liners protect the paint
SKU: PSC45-28-RDA2 -
-
-
Front Bumpers
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs (Bare)- 17-59-010-D
- Poison Spyder Brawler Lite front bumper for Jeep Wrangler JK, part 17-59-010-D
- 3/16-inch bare plate steel with integrated winch mount
- Welded shackle tabs for 3/4-inch recovery shackles
- Recessed buckets for the factory fog lamps
SKU: PSC17-59-010-D -
Tube Fenders
Poison Spyder DeFender Front Fenders (Bare Steel) – 14-02-050
- Bare steel DeFender front fender, negative flare, for maximum tire articulation on tight trails
- Heavy duty 3/16-inch P&O steel plate with a beefy steel rub rail along the hood side
- Gives about 2.5 inches more wheel opening than typical tube fenders; UPC 614901724783
- Mounting location for a ¾-inch LED marker, cutting or drilling required
SKU: PSC14-02-050 -
Tube Fenders
Poison Spyder DeFender Front Fenders (Bare Steel) – 13-02-050
- DeFender front fender in bare steel with a negative flare that tapers in toward the hood
- Built from 3/16-inch heavy duty P&O steel plate, CNC laser cut and brake-formed
- Designed to work with the Jeep’s factory inner fenders, no inner fender replacement needed
- Mounting location for a ¾-inch LED marker; UPC 614901723939
SKU: PSC13-02-050 -
Skid Plates
Poison Spyder Steering Box Skid Plate (Black) – 14-15-010
- Protects the steering box on a Jeep
- CNC laser cut from 3/16 inch high pressure steel plate
- Brake formed and professionally MIG welded
- Satin black powder coat for appearance and corrosion resistance
- Includes additional mounting hardware, with some factory hardware reused
SKU: PSC14-15-010 -
-
Hood Vent
Poison Spyder Hood Louver – 11-53-010-PC
- Hood louver that promotes airflow through and out of the engine bay
- Black powder coat over CNC laser cut lightweight aluminum
- Requires cutting the hood; template and instructions included
- Stainless steel button-head hardware included
SKU: PSC11-53-010-PC -
Tube Fenders
Poison Spyder DeFender Front Fenders (Bare Steel) – 13-02-070
- Bare steel front tube fenders with a 3 inch flare
- Made from 3/16 inch steel plate, retains the inner fender
- Wider wheel opening than stock or typical tube fenders
- Requires cutting or drilling; part number 13-02-070, UPC 614901723977
SKU: PSC13-02-070 -
Tube Fenders
Poison Spyder Comp Cut Crusher Corners with 3 Inch DeFender Flares (Bare Steel) – 14-04-053
Tube FendersPoison Spyder Comp Cut Crusher Corners with 3 Inch DeFender Flares (Bare Steel) – 14-04-053
- Comp cut Crusher Corners with integrated 3 inch DeFender flare, part 14-04-053
- Comp corner design allows clearance for larger tires
- 3/16 inch plate steel, bare steel finish
- Flat head stainless hardware
SKU: PSC14-04-053 -
Tube Fenders
Poison Spyder DeFenders Front Flares (Bare Steel) – 14-02-075
- Front tube fender flare with a 5-inch tapered edge in bare steel
- Extreme clearance design for larger tires with minimal suspension lift
- Made from 3/16-inch steel plate, CNC laser cut and brake-formed
- Needs the DeFender XC Inner Fenders (part number PSC14-02-099) and a hood modification to finish installation
SKU: PSC14-02-075 -
Tube Fenders
Poison Spyder Standard Crusher Corners with 3 Inch DeFender Flare (Bare Steel) – 14-04-073
Tube FendersPoison Spyder Standard Crusher Corners with 3 Inch DeFender Flare (Bare Steel) – 14-04-073
- Standard Crusher Corners with 3 inch DeFender flares, part 14-04-073
- Bare steel finish, 3/16 inch plate
- TJ-style wheel opening
- Provisions for flush-mounted LED taillights, sold separately
- Stainless steel hardware
SKU: PSC14-04-073






































