Artec Industries has 146 parts in the Slickrock 4X4 catalog, most of them in Gussets & Tabs (42), Axle Truss (27), Heim Joints (16) and Skid Plates (10). The vehicles Artec Industries parts here fit most often are the Jeep Wrangler (JK), Jeep Wrangler (TJ) and Jeep Wrangler (JL). Artec Industries part numbers look like "JK4405" and "JL5110-GNKQ"; each product title ends with its part number, and searching for one opens the product. Pick your vehicle at the top of the page to narrow the list to what fits.
Artec Industries
Showing 1–48 of 146 resultsSorted by popularity
-
-
-
-
Shock Absorber Mount
Artec Industries Ultimate Coil Bracket Kit – BR1111
- Artec Industries Ultimate Coil Bracket Kit, part number BR1111
- Bracket design with easier grease fitting access and bottom protection on lower link brackets
- No specific vehicle is named; confirm the mounting points before fitting
SKU: A/IBR1111 -
Heim Joints
Artec Industries Tube Armor (48 inches) – GU4021
- Artec Industries Tube Armor, part number A/IGU4021
- 48 inch tube reinforcement section
- Adds protection to lower links, tie rods, sliders or cage sections
- A 30 inch section adds about 2 lbs to the tube
- Universal fit, not vehicle-specific
SKU: A/IGU4021 -
-
Axle Truss
Artec Industries Rear Axle Swap Kit – TJ4418
- Rear Dana 44 axle swap kit with 1/4 inch thick truss and built-in link brackets
- Part number A/ITJ4418, fits 1997 to 2006 Jeep Wrangler TJ and 2004 to 2006 LJ
- Brackets for factory link, anti-sway bar and shock locations
- Steering ram mount not included
SKU: A/ITJ4418 -
Heim Joints
Artec Industries Premium 3-piece Teflon Lined 7/8 Inch Rod End with 7/8 Inch Bore, Left Hand Threads – JMX14L
Heim JointsArtec Industries Premium 3-piece Teflon Lined 7/8 Inch Rod End with 7/8 Inch Bore, Left Hand Threads – JMX14L
- Artec Industries JMX14L Teflon lined rod end, part number A/IJMX14L
- 7/8 inch bore with 7/8 Inches – 14 shank
- Left hand reverse thread rotation
- Heat treated 4130 chromoly body with PTFE liner
- Universal fit, with no vehicle named
SKU: A/IJMX14L -
-
Axle Bracket
Artec Industries Lower Link Axle Brackets – BR1010
- Artec Industries BR1010 lower link axle bracket, sold as a pair, part number A/IBR1010
- Universal fit control arm mount, not tied to a specific vehicle
- 2.625 mounting width with 9/16 bolt hole for common cartridge joints
- Made from 1/4 thick boxed steel plate
- Hole can be drilled out for 1.25 rod ends with spacers
SKU: A/IBR1010 -
Axle Ball Gussets
Artec Industries Leaf Spring Perch & Plates – BR1034
- Leaf spring perch and plates for spring over axle (SOA) swaps
- Sold as a pair, part number A/IBR1034
- Three leaf pin positions for one inch forward or back adjustment
- Includes truss end caps for Artec Modular Truss
- Hardware not included
SKU: A/IBR1034 -
Axle Truss
Artec Industries JK2TJ Front Axle Swap Kit with Truss – TJ3022
- Front swap kit for Dana 30 axles with 1/4 inch thick truss and built-in link brackets
- Part number A/ITJ3022; fits 1997 to 2006 Jeep Wrangler TJ and 2004 to 2006 Wrangler LJ Unlimited
- Brackets for factory link, anti-sway bar, tracbar and shock locations
- Steering ram mount not included
SKU: A/ITJ3022 -
Skid Plates
Artec Industries JK Under Armor Belly Pan Kit (Natural Aluminum) – JK1010
- Fits the 2007–2018 Jeep Wrangler (JK) Unlimited four-door (manufacturer fitment list)
- 1/4″ 6061 aluminum with 3/16″ zinc-plated steel
- Works best with Artec Heavy Duty Crossmembers
- Exhaust Y-pipe modification and gas tank skid trimming required
SKU: A/IJK1010 -
Axle Truss
Artec Industries JK 1 Ton – Superduty (99-04) Front Dana 60 Swap Kit with Currie Johnny Joints – JK6042
Axle TrussArtec Industries JK 1 Ton – Superduty (99-04) Front Dana 60 Swap Kit with Currie Johnny Joints – JK6042
- Front Dana 60 axle swap kit with 1/4 inch truss and built-in link brackets, part number A/IJK6042
- Artec lists fitment for 2007 to 2018 Jeep Wrangler JK models
- Dana 60 axles need new wheels because the bolt pattern differs from factory JK 5 lug
- Brake and steering components are not included
- Check axle tube lengths of 3.0 inch and 24.5 inch before welding
SKU: A/IJK6042 -
Skid Plates
Artec Industries Heavy-Duty Crossmember (Bare Steel) – JK2003
- Fits the 2007–2018 Jeep Wrangler (JK) Unlimited four-door (manufacturer fitment list)
- 1/4″ thick bare steel, CNC cut and formed
- Converts captured nuts from M12 to 3/8″ for the Artec bellypan kit
- Bolts and washers are not included
SKU: A/IJK2003 -
Skid Plates
Artec Industries Full Bellypan Skid Plate – JL3350
- Fits the 2019 Jeep Wrangler (JL) Unlimited four-door (manufacturer fitment list)
- 3/16 inch bare steel skids with zinc plated steel brackets
- 172 lbs total; 3/4 inch more ground clearance than factory skids
- Bare steel: finish it to prevent rust; OEM gas tank skid removal required
SKU: A/IJL3350 -
-
-
-
A-Pillar Lighting Mounts
Artec Industries A-Pillar Single LED Cube Light Mount – JL5605
- Fits the 2019 Jeep Wrangler JL, two-door and four-door trims shown in the fitment section
- Rigid 1/8 inch steel A-pillar brackets sold as a pair
- Designed for Rigid Industries D Series dually and most pod lights
- New hardware and spacers included
- Lights not included; made in the USA
SKU: A/IJL5605 -
Axle Truss
Artec Industries APEX Front Axel Truss – JL4501
- Fits JL Rubicon Dana 44 M210 front axles and all JT front axles
- APEX peaked top adds rigidity and removes long weld seams
- 1/8 inch mild steel, listed at 6 lbs
- Built for tires up to 40 inch on stock JL axles
- Minimum 1.5 inch lift recommended; welding required
SKU: A/IJL4501 -
Axle Truss
Artec Industries Adjustable Panhard Mount for D60 Truss – BR1026
- Artec Industries Panhard mount, part number A/IBR1026, for Dana 60 axles with Artec truss
- Three holes at 7, 8 and 9 inches from axle centerline
- Fits joints with a 1.75 inch mounting width
- Tube diameter 3 inches; sold as a single mount
- Welding required; the truss is not part of this item
SKU: A/IBR1026 -
Axle Truss
Artec Industries Adjustable Panhard Mount for D60 Truss – BR1025
- Artec Industries A/IBR1025 adjustable panhard mount for Dana 60 axles with Artec truss
- 3 inch tube diameter, single mount
- Holes at 7, 8 and 9 inches from axle centerline
- Designed for joints with a 1.75 inch mounting width
- Welding required for installation
SKU: A/IBR1025 -
-
Axle Bracket
Artec Industries 8.8 Swap Kit OEM LCA Brackets – TJ8805
- Artec Industries OEM lower control arm brackets, part number A/ITJ8805
- Driver and passenger side brackets only, not the full swap kit
- Directly replaces parts TR8801-N and TR8801-O
- Tied to the TJ 8.8 swap, 1997-2006 Jeep Wrangler TJ
SKU: A/ITJ8805 -
-
-
Axle Bracket
Artec Industires Rear Lower Control Arm Brackets with Skids – BR1137
- Artec Industries A/IBR1137 pair of rear lower control arm brackets with integrated skid plates
- 2.625 inch mounting width fits common cartridge joints such as Johnny, Flex and Ballistic
- Made from 1/4 inch thick boxed steel plate for a 3-1/2 inch axle tube
- Requires welding to the axle and removal of the factory bracket
SKU: A/IBR1137 -
-
Skid Plates
Artec 5th Gen Bellypan System – TY6800
- Artec Industries 5th Gen Bellypan System, part number A/ITY6800
- Belly pan skid plate designed for the Toyota 4Runner, built from 3D scans of real vehicles
- No drilling or trimming is needed for installation.
- Verify model years and trims for your vehicle before ordering.
SKU: A/ITY6800 -
-
Axle Upgrade Kits
Artec 8.8 Swap Kit with Truss – TR8801
- Ford 8.8 rear axle swap kit with a reinforced truss top
- Brackets for control arms, shocks, sway bar, track bar and coil springs
- Fits 2004–2006 Jeep Wrangler (LJ) Unlimited and 1997–2006 Wrangler (TJ)
- Requires welding, fabrication and brake line relocation
SKU: A/ITR8801 -
-
-
-
Axle Truss
Artec 14 Bolt Combo Kit – TR1403
- 14 bolt combo kit with heavy duty truss and pinion guard
- 3/8 inch truss top, 1/4 inch gussets, SRW truss just under 51 1/4 inches
- Flat surface for upper links, joints about 8 inches from axle centerline
- Pinion guard and bridge in 3/8 inch mild steel
- No vehicle fitment listed; requires welding and fabrication
SKU: A/ITR1403 -
Axle Truss
Artec Industries TJ 1 Ton Front Dana 60 Swap Kit – TJ6063
- Fits 1997-2006 Jeep Wrangler (TJ) front axles
- TJ 1 ton front Dana 60 swap kit with truss and brackets
- Adjustable single upper link mount for 3-link setups
- 3/8 inch and 1/4 inch mild steel truss, 3/16 inch coil brackets
- Requires general welding, some grinding and brake line relocation
SKU: A/ITJ6063 -
Axle Bracket Kits
One Ton Front 60 Swap Kit
- Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited models
- Artec Industries truss and bracket kit for a Dana 60 front axle, part number TJ6062
- Includes all brackets for a complete axle swap, with 3/8″ thick truss top
- Truss gussets and brackets are 1/4″ thick
- Axle, springs and shocks are not included
SKU: A/ITJ6062 -
Gussets & Tabs
Artec Dana 30/44 Truss Upper Control Arm Brackets with Daystar Bushings – TJ3005
- Artec Industries TJ3005 truss upper control arm brackets for Dana 30 and Dana 44 axles
- Two pieces included, cut from 1/4 inch mild steel
- Passenger side upper control arm mount with reinforcement around the bushing sleeve
- Requires a weld-in sleeve and bushing; factory style bushings do not fit
SKU: A/ITJ3005 -
-
Body Mount Kit
Artec Industries Boatside Body Mounts – TJ2014
- Artec Industries boatside body mounts, part number TJ2014
- Steel mounts laser cut and bent from 3/16″ thick steel
- Boxed, angled underside for better break-over angles
- Fits 1997 to 2006 Wrangler TJ and 2004 to 2006 Wrangler LJ
- Black, used with normal OEM height bushings
SKU: A/ITJ2014 -
Axle Truss
Artec Industries Triangulated TJ GM 14 Bolt Swap Kit with Truss – TJ1413
- Fits 1997-2006 Jeep Wrangler (TJ) rear axles
- 14 bolt triangulated rear truss kit in 1/4 inch mild steel
- Triangulated upper control arms eliminate the track bar
- 2.0 inch high clearance, with a High-Clearance option available
- Includes brackets for control arms, shocks, anti-sway bar and coil springs
SKU: A/ITJ1413 -
Axle Truss
14-Bolt 1-Ton Swap Kit with Truss
- Fits 2004-2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and 1997-2006 Jeep Wrangler (TJ)
- Artec Industries 14-Bolt 1-Ton swap kit with truss for a GM 14-bolt 1-ton rear axle
- Triangulated upper control arms eliminate the trackbar
- 3/8″ thick truss top and 1/4″ thick gussets
- Steering ram mount not included
SKU: A/ITJ1410 -













































