Overview
The Artec Industries One Ton Front 60 Swap Kit, part number TJ6062, is a truss and bracket kit for a Dana 60 front axle. It fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited models, and it provides control arm, spring, anti-sway bar and shock mounting locations for the axle.
The kit is built around a heavy duty truss with a 3/8-inch thick top and 1/4-inch thick gussets, and the link brackets are built into the truss. The brackets line up to the truss, which reduces the measuring and trial fitting needed compared with other bracket systems.
Key features
- Includes all the brackets necessary for a complete axle swap
- Link brackets are positioned by the truss, so the other brackets line up without guessing or measuring
- Truss reinforced with interlocked 1/4″ thick gussets for strength and easy assembly
- Easily upgradeable for future link geometry changes
- Low profile design that Artec says is less likely to interfere with vehicle components
- Control arm, spring, anti-sway bar and shock mounting locations included
Planning a Dana 60 front swap
A Dana 60 front swap changes the axle position, steering geometry and driveline angles, so planning the layout before welding saves rework. The truss sets the axle location, and the other brackets should align with it. Check that the steering components, brake lines and driveshaft have room through full suspension travel.
Spring and shock placement affects ride height and the way the axle moves, so mount them only after the truss is square. Anti-sway bar clearance should be checked in both directions. Inspect welds on the truss and brackets after rough use, and retorque hardware after the first few trail runs.
- Check steering and driveline clearance at full travel
- Square the truss before adding spring and shock mounts
- Inspect truss welds after rough trail use
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TJ6062 |
| UPC | 816791026439 |
| Axle type | Dana 60 |
| Axle location | Front axle |
| Truss top thickness | 3/8″ thick |
| Truss gusset thickness | 1/4″ thick |
| Bracket thickness | 1/4″ thick |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited models with a Dana 60 front axle. It is not made for other Wrangler generations, such as the LJ, JK or JL.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Assembly begins with tack welding the truss together, placing it on the axle, and then fitting the other brackets into place. Because the truss is welded, fabrication equipment and welding experience are needed. Use proper welding gear and work in a safe, ventilated space.
What’s included
The kit includes all the brackets necessary for a complete axle swap, along with the truss.
Not included: The axle, springs, control arms, shocks and anti-sway bar are not included. The brackets are made to mount these parts.






