Overview
The Artec Industries RM6009 is a front Superduty 60 full hydraulic ram mount that holds a double-ended hydraulic steering ram on the axle. It is a universal fit mount that positions the ram by axle rather than by vehicle.
The heavy-duty design protects the steering by placing the ram near the axle center line instead of high above it. An integrated 1/4-inch thick skidplate shields the ram from rocks, and the mount fits PSC Motorsports and Howe Performance double-ended rams.
The mount extends end to end of the axle tube to reinforce it against bending and shearing, and its gusseting protects against impact. Artec pairs it with its Superduty Full Hydro Weld-on High Steer Arms.
Key features
- Front Superduty 60 hydraulic ram mount
- Integrated 1/4-inch-thick skidplate
- Fits PSC Motorsports and Howe Performance double-ended hydraulic rams
- Ram located near the axle center line
- Extends end to end of the axle tube
- Gusseted against impact
- Matches Artec Superduty Full Hydro Weld-on High Steer Arms
Steering geometry and protection
A hydraulic steering ram is a load path. When the ram sits high above the axle, leverage from rocks and impacts can twist the mount and bend the steering. Keeping the ram close to the axle center line reduces that leverage and keeps steering geometry more predictable over rough ground.
Check the mounts and welds regularly, especially after hitting obstacles. Look for cracked welds, loose ram hardware and bent steering arms. Keep hydraulic lines clear of the skidplate edges so they are not pinched during articulation.
Steering system upgrades often go together. Weld-on arms, tie rods and ram hardware should be matched to the same axle setup so loads transfer evenly. Confirm compatibility of each part with your axle and ram before buying.
- Inspect welds after big impacts
- Check ram pin hardware at each service
- Watch for leaks at hose fittings
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | RM6009 |
| Part type | Hydraulic ram mount |
| Axle | Front Superduty 60 |
| Skidplate thickness | 1/4 inch, integrated |
| Compatible rams | PSC Motorsports and Howe Performance double-ended hydraulic rams |
| Fit type | Universal |
Vehicle fitment
It is a universal fit for a front Superduty 60 axle.
Fit depends on the axle and ram, so confirm the axle and ram you plan to use are compatible before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front Superduty 60 hydraulic ram mount.
Not included: The hydraulic ram and the high steer arms.











