Overview
The Artec Industries Ultimate Coil Bracket Kit, part number BR1111, is a suspension bracket kit from Artec’s new bracket line. The brackets are designed to look as if they were part of the vehicle from the start rather than metal added later, and they address shortcomings Artec sees in generic brackets.
A coil bracket holds or positions the mounting points for a coil spring on the suspension. Where a bracket attaches to the frame, axle or control arm decides which vehicles it suits, so the mounting points matter more than the kit name when you are checking fit.
The kit is listed with a universal mounting location and a universal vehicle location. A coil bracket is tied to specific suspension mounting points, so it should not be read as meaning it fits every vehicle. Check the bracket’s position against your own frame and spring setup before you rely on it.
Key features
- Designed in Artec’s new bracket style, which Artec describes as a custom, one-off look
- Grease fittings are easier to reach for service.
- Lower link brackets include bottom protection of the joint, a feature of this bracket line.
- Built to address issues Artec sees in generic brackets
- Listed mounting and vehicle location as universal
Choosing a coil bracket setup
A coil bracket sets where the spring sits relative to the frame, axle or control arm, so it changes spring angle and how the suspension loads under compression and rebound. Before buying, measure the existing mounting points and confirm that the new bracket will hold the spring in the same position. Small shifts in height or angle can affect steering feel, shock stroke and how the tire sits in the wheel well.
Because the bracket changes load paths, it is often worth inspecting the spring pad, shock mounts and nearby brake and wiring routing at the same time. Check weld points and bolt holes for cracks or elongation, especially on a vehicle that has seen hard off-road use. Grease the joints on a regular schedule once the bracket is in place, since easier fitting access only helps if the joints are serviced.
- Measure existing mounting points before buying
- Inspect weld points and bolt holes after the first few trail runs
- Re-check bolt torque once the suspension settles
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1111 |
| Product line | Artec new bracket line |
| Mounting location | Universal mounting location |
| Vehicle location | Universal vehicle location |
| Fitment | Universal fit |
Vehicle fitment
No specific vehicle is named for this kit, and no fitment list is available. Universal is the listed category, but a coil bracket depends on the mounting points of each suspension, so it cannot be assumed to fit every truck or SUV.
No specific vehicle is named for this kit, so confirm fit for your vehicle’s year, model and trim before ordering. Compare the mounting points against your own suspension.
Installation notes
Before the bolts are tightened, check the bracket’s clearance against the spring, shock, brake lines and any wiring routed nearby. The design allows easier access to grease fittings, so the joints can be serviced more easily after installation.
What’s included
The kit is sold as the Ultimate Coil Bracket Kit under part number BR1111. Check the package contents against your installation before starting.









