Overview
The Artec Industries axle bracket kit, part number A/IBR1077, is a pair of lower link axle brackets for a 3-1/2 Inches tube. It is part of a line of formed brackets with a custom look.
Artec says its brackets improve on common designs with better access to grease fittings, bottom protection of the joint on lower link brackets, and a shape that looks designed for the vehicle from the beginning rather than a piece of metal added later. The highlights are described in general terms, so the specifications below are the main details available for this kit.
Because the kit is sold as a pair, check how many brackets your build needs before you start the installation. Measure the axle tube first, since the tube diameter is the main sizing detail given for the kit.
Key features
- Sold as a pair, with a listed tube diameter of 3-1/2 Inches
- Grease fitting access that makes lubrication easier
- Bottom protection of the joint on lower link brackets
- Formed design that looks like it was built into the vehicle from the start
Axle tube sizing and fit
Axle brackets are sized around the tube they clamp or weld to, so the tube diameter is the first dimension to confirm. A bracket made for one tube size may leave gaps or create misalignment on another, which can stress the welds. Measure the outside diameter at each mount point rather than relying on a nominal size.
Think about the control arm location and joint angle as well. Brackets positioned too far from the axle centerline change arm angles and suspension travel. Trial fit the brackets with the joints in place, and mark any clearance issues before final fabrication. Wear eye protection and use suitable blades or bits when cutting or drilling steel.
- Measure tube outside diameter at each mount point
- Trial fit brackets with joints installed
- Mark clearance issues before final welding
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | A/IBR1077 |
| Type | Axle bracket kit |
| Sold as | Pair |
| Tube diameter | 3-1/2 Inches |
Vehicle fitment
No vehicle fitment is given for this kit. Match the 3-1/2 Inches tube and check the mounting layout before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the axle tube before starting. The brackets are made for a 3-1/2 Inches tube, so a tube of another size will not match.
What’s included
This is a kit of axle brackets sold as a pair.
Not included: Joints, control arms and mounting hardware are not included.









