Overview
The Artec Industries TJ2014 is a set of boatside body mounts for Jeep Wrangler TJ and LJ owners. The steel mounts replace the factory body mounts with a fully boxed underside. The listed vehicles are 1997 to 2006 Wrangler TJ and 2004 to 2006 Wrangler LJ models. Artec designed them to replace mounts that catch on obstacles or rot off the frame.
The underside is boxed in and angled so it works as a skid plate, which reduces the chance of the vehicle hanging up on the mount. Artec says these mounts go places factory mounts never could. The kit is used with normal OEM height bushings.
Key features
- Boatside design with a fully boxed underside that acts as a skid plate
- Angled sides for better break-over angles
- Tabs locate the laser cut pieces correctly during assembly
- CNC laser cut and CNC bent from 3/16″ thick steel
- OEM height, used with normal bushings
- Made in the USA.
Things to check
Body mounts carry the weight of the body and take a lot of stress on the trail. When a factory mount rots or tears away from the frame, the body can shift and the tub can start to flex. Replacing the mounts restores the body’s position, which helps keep door gaps and the cowl more even. Boatside designs spread the load differently, so the frame mounting area should be cleaned and inspected before the new parts go in.
Because the mounts sit low, they are exposed to rocks, stumps and ledges. A boxed underside protects the mounting point, though the lowest edge can still catch on rocks and ledges. Check the mounts after hard trail runs for dents, cracks at the welds and loose hardware. Rust on the frame behind the mount is worth checking before reinstalling, since steel mounts are only as good as the surface they bolt to.
- Clean the frame surface before fitting
- Inspect welds and seams after hard trail use
- Re-check hardware after the first few drives
- Look for rust around the bushing holes
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TJ2014 |
| UPC | 816791027177 |
| Material | Steel |
| Thickness | 3/16″ |
| Color | Black |
| Mount height | OEM height |
| Construction | CNC laser cut and CNC bent |
| Fitment type | Direct Fit |
Vehicle fitment
The fitment covers the 1997 to 2006 Jeep Wrangler TJ (65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X) and the 2004 to 2006 Jeep Wrangler LJ (Unlimited and Unlimited Rubicon).
Other Wrangler generations, such as YJ and JK, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bushings insert from the back side above the frame, so the boatside underside only needs a smaller hole. Use normal OEM height bushings with this kit.
What’s included
Steel boatside body mounts.
Not included: OEM height body bushings, which are used with this kit














