Overview
The Artec Industries TR1403 is a 14 bolt combo kit: a heavy duty truss system for a rear axle that adds a flat mounting surface for upper links, plus a pinion guard. The truss top is 3/8 inch thick and the gussets are 1/4 inch thick, and the design reinforces the full length of the axle tubes, not only the link mounts.
The truss is low profile, so the link joints can be mounted with ideal geometry about 8 inches from the axle centerline. The SRW truss measures just under 51 1/4 inches. Check the truss length and link layout against your axle before ordering.
Key features
- Heavy duty truss top, 3/8 inch thick, with 1/4 inch gussets
- Truss spans the full axle length to reinforce both axle tubes
- Flat surface for mounting upper links
- Low-profile truss places link joints about 8 inches from the axle centerline
- Pinion guard and bridge CNC cut from 3/8 inch mild steel to keep the pinion out of the rocks
- Designed for a 14 bolt rear axle, without a steering ram mount
Pinion protection and upper links
The pinion is one of the most exposed parts of a rear axle, and a pinion guard helps protect it when the vehicle drops over rock. A guard works best when it is fitted closely to the housing and bridge, so the pinion is shielded without interfering with the driveshaft angle. Check the guard for bends after trail use and tighten its fasteners, since a loose guard can shift under load.
Upper links attach to the truss, so the link layout and the pinion guard should be planned together. Weld the truss and link mounts with the axle clamped and supported, and finish the pinion guard only after the geometry is confirmed. Look for cracked welds and worn joints after early trail runs.
- Fit the guard closely to the housing
- Check the driveshaft angle with the guard fitted
- Inspect welds and joints after early trail runs
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TR1403 |
| UPC | 816791024480 |
| Axle type | 14 bolt |
| Axle location | Rear axle |
| Truss top thickness | 3/8 inch |
| Gusset thickness | 1/4 inch |
| Truss length | SRW, just under 51 1/4 inches |
| Link joint position | About 8 inches from axle centerline |
| Pinion guard material | 3/8 inch mild steel |
| Steering ram mount | Without steering ram mount |
| Fitment type | Universal fit |
Vehicle fitment
No specific vehicle is named for this kit. It is designed for a 14 bolt rear axle with an SRW truss just under 51 1/4 inches long, so match your axle type and truss length before ordering.
No vehicle years or models are named for this kit. Confirm your vehicle’s year, model and trim before ordering, and check your axle type.
Installation notes
This kit requires general welding and fabrication skills, so it is not a bolt-on installation. Plan to fit the truss and link mounts, and weld with the axle clamped and supported, before the pinion guard and bridge are finished.
What’s included
The kit includes the 14 bolt heavy duty truss system and the Artec Industries 14 bolt pinion guard and bridge.
Not included: the axle housing and the upper links that mount to the truss.












