Overview
The Artec Industries BR1024 is an adjustable panhard mount for Artec truss systems on Dana 60 axles. It comes as a single mount with a 3 inch tube diameter.
The mount is designed for 3-link or 4-link setups and matches the style and strength of the truss it fits. Artec says its geometry and clearances suit other components such as hydraulic rams and coilovers.
Key features
- Adjustable panhard mount with three holes at 7, 8 and 9 inches from axle centerline
- Designed for 3-link or 4-link setups
- Matches the style and strength of Artec truss
- Designed for joints with a 1.75 inch mounting width
- Designed for 3/4 inch and 7/8 x 3/4 inch rod ends with high misalignment spacers
- The mount works with 3/4 inch and 7/8 x 3/4 inch rod ends, and its geometry and clearances are suited to hydraulic rams and coilovers.
How a panhard bar works
A panhard bar keeps the axle centered side to side under the vehicle, so the axle does not shift when the suspension compresses or the vehicle leans in a turn. The mount is the fixed point on the truss that the bar attaches to, so its position controls how the bar angles through its travel.
Changing the mounting hole changes the bar length and angle, which affects roll steer and the lateral location of the axle. Choose a hole position after measuring the suspension at ride height, and check that the rod ends clear the frame and nearby brackets at full travel.
- Check rod end clearance at full compression and full droop
- Keep the bar level when the vehicle sits at ride height
- Inspect rod end threads for wear after rough use
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1024 |
| Type | Panhard mount |
| Quantity | Single |
| Tube diameter | 3 inch |
| Joint mounting width | 1.75 inch |
| Mounting holes | 7, 8 and 9 inches from axle centerline |
| Axle type | Dana 60 with Artec truss |
Vehicle fitment
It is made for Dana 60 axles with Artec truss, including 1978 to 1979 Chevy and Ford Dana 60 axles. Confirm your axle’s make, model year and suspension setup before installing.
It is not a vehicle-specific part beyond those axles. Confirm your axle’s make, model year and suspension setup before installing.
Installation notes
Installation requires welding. The three hole positions let you fine tune the suspension, and the joints must match the 1.75 inch mounting width.
What’s included
One panhard mount, sold as a single unit.
Not included: the Artec truss, rod ends and misalignment spacers, which are separate parts.









