Overview
The Artec Industries Shock Towers, part BR1062, are mounting towers for shocks, coilovers, air shocks or struts.
The tower is a mounting piece that connects a shock, coilover, air shock or strut to the vehicle at its mounting point.
Because the tower is a mounting piece, its fit depends on the shock or strut body and the mounting point on the vehicle. Check both before ordering a tower and planning the install.
Key features
- Mounts shocks, coilovers, air shocks or struts
- Provides a mounting point for shock components
- Universal design for a range of applications
Choosing a shock tower
A shock tower is the anchor point that carries a shock or strut’s load into the body or frame. Its job is to hold the shock at the correct angle and distance so the damper moves freely through its travel. Because the tower takes repeated load, the welds and mounting tabs deserve a close look before and after installation.
When choosing a tower, match the eye or mounting end of the shock to the tower’s hole pattern, and check that the tower clears tires, brake lines and steering parts at full travel. Mount the tower on solid structure rather than thin sheet metal, and use hardware suited to the load. Recheck the fasteners after the first few drives.
- Shock eye and stud type
- Clearance at full compression and extension
- Weld condition and mounting tabs
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | BR1062 |
| Type | Shock tower |
| Compatible with | Shocks, coilovers, air shocks, struts |
Vehicle fitment
Confirm the tower matches your vehicle’s mounting points before ordering.
Check the mounting points on your vehicle before installing the tower. Confirm your vehicle’s year, model and trim before ordering.












