Overview
The TJ4417 is a front axle swap kit with truss, built around a JK front Dana 44 (D44) axle. The kit reinforces the entire axle while providing the factory link, anti-sway bar, track bar and shock locations.
The 1/4 inch thick truss top has the link brackets built in, so the other brackets fit into place once the truss is on the axle. The JK front D44 has a high pinion differential, a larger ring gear than the Dana 30, larger disc brakes and a wider WMS (wheel mounting surface).
Key features
- 1/4 inch thick truss top
- Link brackets incorporated into the truss
- Brackets for the factory link, anti-sway bar, track bar and shock locations
- Truss reinforces the entire axle
- Described JK front D44 features include a high pinion differential and a larger ring gear than the Dana 30
- Larger disc brakes and a wider WMS on the JK front D44
Choosing a front swap setup
A front axle swap is usually planned around the steering, the driveline and the brakes as much as the truss. A Dana 44 has different pinion and ring gear geometry from a Dana 30, so the driveshaft angle and the axle shaft length should be checked before the new axle goes under the vehicle.
The truss ties the axle together, but it does not replace worn components. Inspect the ball joints, tie rod ends and steering arms as part of the swap, and plan for a track bar and sway bar setup that matches the new axle position.
- Measure driveshaft angles with the new axle installed
- Check brake line length after the axle is relocated
- Replace worn steering joints during the swap
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TJ4417 |
| Truss top thickness | 1/4 inch thick |
| Axle location | Front |
| Axle reference | JK front D44 (Dana 44) |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The kit is built around a JK front D44 axle and a JK2TJ front axle swap.
Confirm your vehicle’s year, model and trim before ordering, and check the axle and mounting points against your vehicle’s own measurements.
What’s included
The kit includes the 1/4 inch truss top with its brackets for the factory link, anti-sway bar, track bar and shock locations.
Not included: the Dana 44 axle assembly itself.









