Overview
The Artec Industries Tube Armor (48 inches, part number A/IGU4021) is a tube reinforcement section for adding strength to one part of a tube without replacing the whole length. It suits builders who want extra protection on lower links, tie rods, sliders or a section of roll cage without a large weight penalty.
A 30 inch section adds about 2 lbs to the tube. Reinforcing with a full length of thicker tube costs more and weighs more, because thicker tubing is significantly higher in price. Placing the reinforcement only where it is needed also avoids the extra girth of thicker tube, which can make packaging easier in a tight build.
Key features
- Reinforces only the section of tubing that needs protection
- Named uses include lower links, tie rods, sliders and sections of cage
- Adds less weight than a full length of thicker tube
- Less girth than thicker tubing, which can simplify packaging
Where reinforcement makes sense
Tubing that carries load at a joint, such as a lower link, tie rod or cage section, is often the first place to show flex, dents or cracks. Reinforcing one section lets a builder add strength at the point of concern instead of upgrading the full length. The choice depends on the load path, the shape of the tube and whether the section can be accessed for inspection.
Look along the reinforced section after hard runs for new dents, bends, cracked welds or paint lifting at the joints. Reinforcement can move stress to the next weakest point, so inspect the tube ends and adjacent welds too. Keep any reinforcement consistent with the rest of the build, and do not rely on it to fix a bent or cracked tube.
- Identify the section that takes the most load
- Inspect the welds at each end
- Look for new dents or bends after hard runs
- Replace a bent or cracked tube rather than reinforcing it
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | A/IGU4021 |
| Length | 48 inches |
| Added weight | About 2 lbs for a 30 inch section |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit and is not built for a particular vehicle. Its use depends on the tubing you are protecting rather than the model you drive.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The product is the 48 inch Tube Armor reinforcement section. No additional hardware is described.











