Overview
The Artec Industries 8.8 swap kit OEM LCA brackets, part number A/ITJ8805, are the driver and passenger side lower control arm brackets for a TJ 8.8 swap, placed in the OEM positions. They are the same brackets Artec uses in its TJ 8.8 swap kit, offered on their own by request.
This is not the whole swap kit. The brackets directly replace parts TR8801-N and TR8801-O.
Key features
- Driver and passenger side lower control arm brackets
- Mounts in the OEM positions
- Directly replaces TR8801-N and TR8801-O
- Brackets only, not the complete swap kit
Lower control arm basics
Lower control arms locate the axle fore and aft and carry braking and acceleration loads, so the brackets that hold them need to stay rigid under those forces. In an 8.8 swap, bracket position also sets the arm angle, which influences caster and ride height. Moving the mounts even slightly changes how the suspension behaves, so the arms should be measured and checked against the planned geometry before final assembly.
Bushings and bracket welds are the first things to inspect on an older setup. Cracks around the bracket base, worn bushings or a clunk on acceleration all point to movement that needs attention. After installation, a full alignment is needed, and it is worth rechecking the setup after the first few trail outings when everything has settled.
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | A/ITJ8805 |
| Type | Lower control arm brackets |
| Position | OEM driver and passenger side |
| Replaces | TR8801-N and TR8801-O |
| Application | TJ 8.8 swap |
| Fitment | Universal fit |
Vehicle fitment
It is made for Artec’s TJ 8.8 swap, which fits the 1997 to 2006 Jeep Wrangler TJ. Confirm the match for your vehicle’s year and trim before buying.
It is not made for the YJ, LJ or JK Wrangler, which are separate generations.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is only the lower control arm bracket set, the rest of the TJ 8.8 swap must be sourced separately. Lower control arm changes affect suspension geometry, so check the alignment after installation.
What’s included
Driver and passenger side lower control arm brackets.
Not included: the complete Artec TJ 8.8 swap kit and the other components it contains.








