Overview
The Artec Industries TR1405 is a 14 bolt rear modular truss for a one-ton swap in the back of a Jeep Wrangler TJ or YJ. It has a 3/8 inch thick truss top and 1/4 inch thick gussets, and it provides a flat surface to mount upper links.
The truss is offered by itself or with add-ons: leaf spring perches designed for a YJ Wrangler, or coil spring perches designed for rear TJ Wrangler coil springs. Artec also offers high clearance shock mounts that place the lower shock mounts in front of or behind the axle in the lowest position possible without giving up ground clearance.
Key features
- Modular design: truss alone, or with leaf spring or coil spring perches
- 3/8 inch thick truss top and 1/4 inch thick gussets
- Flat surface for upper link mounts
- Leaf spring perches designed for YJ Wrangler leaf springs
- Coil spring perches designed for rear TJ Wrangler coil springs
- High clearance shock mounts put the lower mounts in front of or behind the axle at the lowest possible position
Choosing spring perches
The spring perches determine how the springs seat on the rear axle, and they must match the spring type you run. Leaf spring perches and coil spring perches are not interchangeable, so confirm the spring style before fitting anything. Measure the spring position on the truss once it is in place, since the perch height changes the ride height and the spring angle.
High clearance shock mounts are a separate decision. Placing the lower shock mounts in front of or behind the axle changes how the shock moves through travel, so plan the shock length and mount position together with the perches. Check all the mounts after the first trail runs for loose hardware or cracked welds.
- Match perches to the spring type
- Check spring seating before welding
- Plan shock length with the mount position
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | TR1405 |
| UPC | 816791024503 |
| Axle type | 14 bolt |
| Axle location | Rear |
| Truss top thickness | 3/8 inch |
| Gusset thickness | 1/4 inch |
| Steering ram mount | Without steering ram mount |
| Optional add-ons | Leaf spring perches (YJ), coil spring perches (rear TJ), high clearance shock mounts |
Vehicle fitment
It is designed for a one-ton swap in the rear of a Jeep Wrangler TJ or YJ, with leaf spring perches for the YJ and coil spring perches for rear TJ coil springs. Confirm which spring setup you run before ordering.
Later Wrangler generations such as the JK or JL are outside this intended use. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires general welding and fabrication skills. The perches and high clearance shock mounts are separate items, so each needs its own fit-up with the truss.
What’s included
The truss is offered by itself. Not included: the leaf spring perches, coil spring perches and high clearance shock mounts, which are separate add-ons.











