Overview
The Artec Industries RM6001 is a Dana 60 full hydraulic ram mount. It is a single mount that holds a double-ended hydraulic steering ram on the axle and fits any tube diameter.
The design places the ram close to the axle centerline rather than high above it. An integrated 1/4-inch-thick skid plate protects the ram from rocks. The mount fits PSC Motorsports and Howe Performance double-ended hydraulic rams.
The mount runs end to end along the axle tube, which reinforces the axle against bending and shearing. Gusseting protects the mount against impact damage.
Key features
- Ram mount for a Dana 60 full hydraulic steering setup
- Fits PSC Motorsports and Howe Performance double-ended hydraulic rams
- Integrated 1/4-inch-thick skid plate
- Ram sits near the axle centerline
- Extends end to end of the axle tube
- Gusseted for impact protection
- Works with Artec Ultimate Dana 60 High Steer Arms.
Ram placement and axle work
A hydraulic steering ram pushes against the axle, so the mount takes the force the steering load produces. A mount placed close to the axle centerline keeps the ram in line with the steering, and a full-length mount spreads the load along the tube. Check the mount’s weld zones and the axle tube for cracks or wear after heavy use.
Hydraulic lines need routing with room to move through the suspension’s full travel. Keep hoses away from the tire, exhaust and sharp edges, and use protective sleeves where they pass near the axle. Check fittings for leaks and tighten them as needed.
Rock impacts are common on trails, so inspect the skid plate and gusseting after rough runs. Fresh scrapes or bends in the plate are a sign the mount has taken a hit.
- Route hoses clear of tires and exhaust
- Check fittings for leaks after install
- Inspect the skid plate after rock strikes
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | RM6001 |
| Part type | Hydraulic ram mount |
| Axle | Dana 60 |
| Skid plate thickness | 1/4 inch, integrated |
| Compatible rams | PSC Motorsports and Howe Performance double-ended hydraulic rams |
| Tube diameter | Any |
| Sold as | Single |
| Fit type | Universal |
Vehicle fitment
It fits Dana 60 axles with any tube diameter.
The mount is built for Dana 60 axles and for PSC Motorsports or Howe Performance rams. Confirm the axle and ram you plan to use before ordering, and confirm your vehicle’s year, model and trim.
What’s included
One ram mount. It is sold as a single piece.
Not included: The hydraulic ram, high steer arms and other steering parts.










