Select your vehicle

Artec Dana 60 Front Truss – TR6033

Artec Industries

Shop Artec Industries Axle Truss on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Artec Dana 60 front truss, part number TR6033
  • 3/8 inch thick truss top and 1/4 inch thick gussets
  • Flat surface for mounting upper links
  • Requires general welding and fabrication skills

Description

Overview

The Artec Dana 60 front truss, part number TR6033, is a heavy duty truss system for a Dana 60 front axle. It reinforces the entire axle and provides a flat surface for mounting upper links.

The truss top is 3/8 inch thick and the gussets are 1/4 inch thick. The design strengthens both the axle and the link mounting surface.

Key features

  • 3/8 inch thick truss top
  • 1/4 inch thick gussets
  • Flat surface for upper link mounts
  • Reinforces the entire axle
  • Designed for the front axle

Welding a truss safely

A truss that ties the axle to the upper link mounts carries braking and cornering loads through the welds, so weld quality matters as much as the parts themselves. Clean the mating surfaces to bare metal, fit the truss before tacking, and check alignment with the axle centered. Working in small passes and allowing the metal to cool between them helps limit distortion that could change the upper link angles.

After welding, inspect the seams for cracks or undercut and recheck the link angles once the truss is in place. Trail use can reveal weak welds quickly, so a second look after the first few outings is wise. Upper link mounts and their bushings should be checked at the same time, since a bent link or worn end can shift the load onto the truss in ways it was not built to handle.

Specifications

Brand Artec Industries
Part number TR6033
UPC 816791024619
Axle type Dana 60
Axle location Front
Steering ram mount Without
Truss top thickness 3/8 inch
Gusset thickness 1/4 inch

Vehicle fitment

It is made for Dana 60 front axles. Confirm the axle type and upper link mounting points before fabrication.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Installing this truss takes general welding and fabrication skills, so it is not a bolt-on upgrade. If welding experience is limited, have a qualified fabricator assess the truss before it goes on the axle.

What’s included

The truss system itself.

Not included: Welding equipment and upper link components.

SKU: A/ITR6033 Category:

Specification

Shipping weight 39.00 lbs
Package dimensions 48.00 × 14.00 × 7.00 in
brands

Questions & Answers

What is the Artec TR6033?

The Artec TR6033 is a heavy duty Dana 60 front truss system with a 3/8 inch thick truss top and 1/4 inch thick gussets. It reinforces the front axle and gives a flat surface for mounting upper links.

Does the TR6033 require welding?

Yes. This kit requires general welding and fabrication skills. Plan for that work before installing the truss, or have a qualified fabricator handle it.

Is this truss for the rear axle?

No. It is a front axle truss made for Dana 60 axles, with the axle location set to front. A rear Dana 60 truss is a different product.

Will this truss fit my Jeep?

No specific vehicle applies, and it is a universal fit for Dana 60 front axles. Check that your axle type and upper link mounting points match before ordering.

How can I tell if the truss welds need repair?

Look for visible cracks, rust streaks along the seam, or paint that has lifted in a line. Any movement between the truss and axle tube is also a warning sign. Repairs should be made by a qualified fabricator, and the truss should be rechecked after the work.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Artec Industries Axle Truss on Amazon