Overview
The Poison Spyder Winch Fairlead Mount, part number 45-57-010, installs between the winch and the bumper. It gives the winch fairlead a mounting surface and is finished in black powder coat.
It is designed to fit most Warn winches, except the 8274. It accepts either a hawse or a roller fairlead.
Key features
- Installs between the winch and bumper
- Black powder coat finish
- Accepts hawse or roller fairleads
- Designed for most Warn winches, except the 8274
Winch mounting checks
A winch fairlead mount holds the fairlead in line with the winch drum, so the rope leaves the drum at a steady angle. Alignment matters because a misaligned fairlead can pinch the rope and wear the drum unevenly. Check that the mount clears the bumper and the winch housing before the rope is wound on, and make sure the fairlead can move freely.
Hawse fairleads are simple and suit straight pulls, while roller fairleads reduce friction when the rope runs at an angle. Choose based on how you expect to winch, and keep the rope path clear of sharp edges. After heavy pulls, inspect the mount, the bolts and the bumper welds, since loads can loosen fasteners over time. Tighten them and look for cracks or bends.
- Confirm winch model before purchase
- Check bumper mounting points for clearance
- Inspect bolts and welds after heavy pulls
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-57-010 |
| UPC | 614901728859 |
| Finish | Black powder coat |
| Fairlead type | Hawse or roller |
| Winch fit | Most Warn winches, except 8274 |
Vehicle fitment
No vehicle is named. The mount is matched to the winch and the bumper rather than to a vehicle model, so the winch model and the bumper mounting points decide the fit.
Confirm that your winch is not the 8274 and that the mount suits your bumper before ordering.
What’s included
The fairlead mount. Check that you have the bolts and fairlead needed for your setup before installing.














