Overview
The Poison Spyder Full Cage Kit, bare steel, part number 14-19-010, is a complete weld-in roll cage that replaces the factory cage. The TJ Full Cage Kit incorporates Poison Spyder’s proprietary lower A-pillars, so the kit is written for the Jeep TJ, 1997 to 2006. It is designed for hard core four-wheeling and is supplied with every tube and plate steel component needed to build the cage.
The cage is built from 1.75 inch by .120 wall DOM tubing and high strength 3/16 inch plate steel. The lower A-pillars help support the forward section of the cage without intruding into the dash or cutting into legroom, which is the reason for their shape.
Key features
- Complete weld-in cage that replaces the factory roll bar
- Lazer-Fit system with CNC laser-notched, CNC bent tubing
- Assembly guides laser etched onto each tube
- Each component marked with part identification
- Proprietary lower A-pillars with dash clearance
- Gussets and mounting plates CNC laser cut from 3/16 inch plate steel
Before the weld-in build
A full roll cage changes the structure of the upper body, so the condition of the floor, rockers and tub under the cage matters. Look for rust, prior repairs and thin metal before fitting the cage, since the mounting points carry the load of the cage in a rollover. Solid metal gives the weld joints something sound to bond to.
Plan the build in the order the etched guides indicate. Dry-fit the tubes, check clearance at the dash and the doors, and confirm that the lower A-pillars sit correctly before the final welds. Keep the work area clean and ventilated, and use the proper welding technique for the tubing and plate thickness. After the cage is in, inspect the welds for cracks and recheck clearances after any future body work.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-19-010 |
| UPC | 614901725896 |
| Type | Full roll cage kit, weld in |
| Finish | Bare steel |
| Tubing | 1.75 inch by .120 wall DOM |
| Plate steel | 3/16 inch high strength |
| Lower A-pillars | Proprietary Poison Spyder design |
| Installation | Requires welding |
| Shipping style | Weld-in kit of parts, not assembled |
Vehicle fitment
The TJ Full Cage Kit is for the Jeep Wrangler TJ, 1997 to 2006. Confirm the cage fits your Jeep’s body and roll bar before welding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires welding the cage to the vehicle, and the kit is supplied as parts that need to be assembled. The laser etched guides mark where each tube joins the next, which saves time during assembly. Weld with care around the body and dash, and check the lower A-pillars against the dash before the final welds.
What’s included
Every tube and plate steel component needed to assemble a complete Poison Spyder Full Cage, with laser etched assembly guides and part marks.




























